Posts Tagged ‘GTX 750 Ti power consumption


We have already published some interesting findings about the power usage of the new GeForce GTX 750 Ti graphics cards when used for crypto mining and recently we have built a 6-card GTX 750 Ti mining rig. We have taken some time to also measure the power usage of the individual cards as well as the total power usage of the whole system in order to give you some additional details about what you can expect in terms of power consumption from such a mining rig. We have used Gigabyte GeForce GTX 750 Ti video cards (N75TOC-2GI) that do have an external onboard PCI-E power connector and we started by measuring the total power that goes to a single video card both trough the PCI-E slot as well as through the external PCI-E power connector with the help of a watt meter that is attached directly to the power lines going to the video card (using a powered extender).


As you can see on the photo the total power used by the video card is about 31W (with the card running at +135 MHz for the GPU and + 610 MHz for the video memory). Note that this power measurement is on the 12V line from the PSU going to the video card, so it does not take into account the power efficiency of the power supply and as a result the total power used by the video card from the mains will be higher by something like 15-20% (depending on the PSU). Note that we have used a powered PCI-E extender with USB 3.0 cable for the data lanes. This extender takes all the power provided to the PCI-E slot of the video card through a 4-pin molex connector and supplies both the 12V and the 3.3V power that the card uses drawing only power from the 12V line (there is a voltage regulator to output 3.3V from the 12V input on the extender’s board). So what the wat tmeter shows is the total power going from the PSU to the video card and in the case of the Gigabyte GTX 750 Ti it was 31W. Again the total power usage from the mains will be higher as this measurement does not take into account the power efficiency when converting 220V/110V to 12V.


So what is the situation with the total power usage per GTX 750 Ti video card from the mains? The easiest way to check that is to measure using a watt meter connected between a power socket and the power supply of the computer the total power consumption of the system with 6 cards and then disconnect one card and to measure again. The difference we got using this method was about 79W, though this is not for the video card only as it also affects a bit the overall power consumption of the whole system. Also note that the measured 374 Watt for the 5-card and 453 Watts with the 6-card setup are with the video cards overclocked to +135 MHz/+610 MHz. The results we’ve got with the cards running at the stock frequency were 367W with 5-cards and 432W with 6 cards or a 65W difference per card (total power used from the mains). This difference of 14 watts between stock and overclocked frequencies brings roughly about 40 KHS more in terms of hashrate for Scrypt mining (per card). Have in mind that our power supply used had an efficiency rating of about 80-85%, so this means that 15-20% of the total power used at the mains is actually wasted in the conversion between 220V/110V and 12V.

Another interesting thing that we have noticed while testing the power usage and overclocking capabilities of the 6-card GeForce GTX 750 Ti mining rig was the total power consumption that we got for the system with the power target limit changed from the standard setting of 38.5W to the 65.5W. The watt meter showed an increase of power from the 453W with the 38.5W power target limit to 556W with the 65.5W power limit – about 100W increase with the same operating frequencies with a slight increase in performance of about 90 KHS total from the 6 cards or roughly a bit over 1W per KHS and in our opinion this is not worth the extra increase in power usage, so raising the power limit may not always be a good idea!


The GeForce GTX 750 Ti series of graphics cards based no the new Nvidia Maxwell architecture have really captured the attention of crypto currency miners due to their good performance (hashrate) per watt. Nvidia is advertising these cards to have 60W TDP, however we have discovered that the actual TDP limit for the power target set in the video BIOS of these cards is 38.5W…


This made us dig into the matter a bit more in order to see how much power actually does a GeForce GTX 750 Ti draw from the motherboard (a reference GT 750 with no external PCI-E power connector). So we’ve attached a watt meter to the power line of an external PCI-E extender to see how much power is drawn by the GT 750 Ti card. The results we got were quite surprising, even though we knew that the default power consumption should fit in the 38.5W limit for the power target set in the BIOS. With the stock frequencies for the GPU and the video memory the GeForce GTX 750 Ti has shown to draw just about 28W ot power producing about 250 KHS hashrate for Scrypt mining. After getting the card overclocked to +135 MHz for the GPU and +650 MHz for the video memory the power consumption has risen a bit to about 34W average with a hashrate of about 300 KHS for Scrypt crypto mining.

So if you were calculating the power usage of GTX 750 Ti as 60W in order to see the ratio of hashrate per Watt of power, then you should rethink how you calculate it now. Note that this is the actual power that goes from the PSU to the video card, the real power consumption with a 80 Plus certified power supply that provides 90% efficiency for example would rise with 10% to about 30W (stock) and 37W (overclocked) respectively as the actual power drawn by the card from the wall socket.