DualMiner has published a short PDF document named iBeLink DM384 Specification and Users Guide that gives a bit more details on what to expect from the X11 ASIC miner. Apparently this is the electronic version of the manual that will be shipped with the device, the document is labeled as revision 1.1 dated from February 18th with the 1.0 revision dated from January 22 2016 (updated rev 1.2 now available). The document includes some screenshots from the miner’s web interface that is apparently running on the Raspberry Pi that controls the 4 miner blades that the device has. The document reveals some interesting things such as the ability to easily overclock the miner by changing the chip PLL settings. It might however be limited in terms of maximum overclock capabilities over the stock settings judging from the screenshots in the manual. There are however not that many new details about the device revealed in the document, still you might want to check it out if you are interested in the iBeLink DM384 X11 ASIC miners. As already mentioned earlier today we have pre-ordered a unit, so we’ll be doing a detailed review once it arrives, so stay tuned for more details when we get our hands on the hardware hopefully soon.
- In: Mining Hardware
- Tags: DM384M, DM384M miner, Dualminer, iBeLink, iBeLink DM384 Manual, iBeLink DM384 User Guide, iBeLink DM384M, Tiannengbo Group, TNB0301, TNB0301 ASIC, TNB0301 chip