Posts Tagged ‘Nicehash


Today there are quite a few new crypto coins launching, so if you are into following and mining new crypto currencies and want to catch them when they start and are easier to mine due to their low difficulty, then you might want to check the list we have prepared. Do note that the list may not include absolutely every new coin that launches today, but it should cover most of the better looking ones. Be careful however as listing a new coin launching today below does not mean that it will pick up for sure, so be careful where you point your hashrate at, and especially if you rent hashrate or mining rigs…

List of New Crypto Coins Launching Today:
NumberCoin (NUMC) – Scrypt – POW/POS – 10% IPO, 0.5% Premine
AustroCoin (ATC) – Scrypt – POW/POS – 1.6% Premine
BitSlap (BS) – X11 – POW – 0.5% Premine
Digit (DIG) – X13 – POW/POS – 1.25% from each block to devs
VOOT – X13 – POW/POS – 2% Premine
Flux (FLX) – SHA-3 (Keccak) – POW

Services offering Renting of Mining Rigs or Hashrate:
Mining Rig Rentals
Beta Rigs
Lease Rig


NiceHash is an interesting and relatively new service that allows users to sell the hashrate that their mining hardware generates or to buy such to mine a specific coin at a user set pool with one of the supported crypto algorithms. This service however is not a mining rig leasing or cloud mining from a centralized service provider, it is more like something in between these two and the result you get is actually pretty nice as an alternative to the other two services. We have tried the service for both selling some hashrate ourselves as well as buying some to see how are thing and to also get a good idea on how well it operates for both buyers and sellers. We are also going to share some useful tips that we have discovered during our testing of the service, so that you might get a better start should you decide to check it out yourself.

The first impression when you open the website of NiceHash can be a bit misleading if you are not sure what to expect, so we do recommend to start with the FAQ section of the website to learn about the service and how it operates in order to get to know how things work. The FAQ section should give you most of the answers you might have, and you should also check the page with information about compatible software miners with the service and make sure you are using one of the recommended miners in order to avoid possible problems. In short what NiceHash does for you is act as a stratum proxy between you and the pool that your hardware is mining at for the moment. So all you have to do is to set the right stratum server for NiceHash in your miner, depending on the algorithm that the miner uses and just run the miner as usual with your Bitcoin address as a username and enter any password. It is as simple as that and you don’t even need to register in order to be able to sell your hashrate, though for buying hashrate you will have to make an account, because you will be depositing Bitcoins that you will use for purchase. Currently NiceHash supports Scrypt, SHA-256, Scrypt-Adaptive-Nfactor and X11 algorithms and you can purchase hahsrate and point it at the pool you want to mine at if you are buying hashrate. All purchases and payments are made in Bitcoins, no other crypto currency is currently supported by the service. So you can say that when selling your hashrate it is almost as if you are mining in a multipool where regardless of what is being mined you get payed in Bitcoins in the end.


Now, we have started with the buying part where we have decided to get some X11 hashrate as DarkCoin is currently booming, so the interest in X11 hashrate is high at the moment. We have started with depositing a small amount of Bitcoins to our wallet address in NiceHash and we quickly got the deposit available as only two confirmations are required for you to be able to use the deposited Bitcoins for orders. Again, in order to be able to buy hashrate you will need to register as the procedure is a bit more complex and can be even a bit confusing the first time you go through the whole process, but after that it is easier as you know what to do and how.


The page where you create an order is the hardest to go through the first time, especially if you haven’t familiarized yourself with the way the service operates and checked how things work with the orders. Here you need to select the algorithm you are going to be purchasing hashrate for, then select how much you are going to pay (you need to have the Bitcoins already deposited and confirmed), the minimum you cans pend for an order is 1 Bitcoin cent (0.01 BTC). You can select to limit the maximum hashrate you are getting per second, something that is a good idea actually, but we’ll get back to that in a moment. And then you also need to set the price you are willing to pay in Bitcoins per Gigahash per Day, you can find the current rates for the different algorithms on the front page. Calculating this can be a bit confusing, and you need to be careful and watch how the market price is moving with the currently available orders. Based on your settings you will get an estimation for the total hashrate you will get and the duration you will have the purchased hashrate mine for you. Do note that the service charges 2% fee on the purchase of mining hashrate.

After that you need to enter the pool details, make sure you are setting the right pool that uses the algorithm you are purchasing hashrate for and also make sure to use pools that are working stable and can handle a lot of hashrate coming to them. If you do not limit the hashrate you are going to be getting and you have the highest price you ma end up throwing an enormously high hashrate at the pool of your choice and thus you may bring it down if it cannot handle the load. This is one of the reasons you need to use some sort of a limit to the hahsrate you are going to be using, regardless of the total amount you purchase. One of the nicest things about NiceHash is that you can purchase 1 GHS worth of X11 hashrate for example and have that mining for you for 10 minutes, 60 minutes, a day or more… it all depends on the total amount you are spending and the limit (if any) you have set. So you can purchase ridiculously high hashrate for short period of time and get it right away instead of purchasing just a few megahashes that will mine for you for months – the end result should be similar. The first option of getting a lot of hashrate for shorter time does have some more advantages however as yo do not have to worry about difficulty increase as much as when mining for longer time, but it also has drawbacks. You must always set limits in the hashrate if you are mining for crypto currencies such as Bitcoin or DarkCoin that do have pretty high difficulty and finding block make take up to 30 minutes, an hour or even more. The reason for that is to have the hashrate mine for you for long as if you get some bad luck and the block finding time is over the average your mining profit may be less if you throw a lot of hashrate for just a few minutes. Spreading the hashrate with a limit for longer time would cover better for bad luck at the pool and will also minimize the risk of you bringing the pool down, so do consider setting the limit for hashing speed.


When you activate an order you can see the progress and you can also edit some of the parameters or cancel the order before it is fully executed and get back the remaining Bitcoins that are still not spent. What you can edit here is the price you are paying for GH per Day, though there is a catch here and it is that you can only increase the price, not get it lower than your initial offer. This is a plus for the people selling hashrate, but not so good for maximizing efficiency for people buying hashrate, though you can cancel the order and recreate it with lower price if suddenly the market price for the hashrate drops significantly under your set price. The other thing you can change on the fly is the limit of the hashrate you have set, or if you haven’t set one you can add it here. Changing both settings may take a bit before they are activated and if you are changing the limit significantly it may also take a bit longer before the active hashrate adjusts to the new value.


You can also track your order in the list of orders on the homepage, your active orders are marked with blue, so they are easy to spot and keep track of. This is the place where you can track the current market price and especially if you do not want to rent all of the available hashrate, but only some part of it there is no need to set the highest price, with a lower offer you can still get the amount of hashrate you need and as we’ve mentioned if the price increases you can also adjust it up or cancel the order and recreate it if the price gets lower. It is a wise idea to keep track of the market in order to really get the maximum for the Bitcoins you pay for renting hashrate and if needed do adjustments to your order. Also do check the expected return of investment based on the price you pay and the hashrate you get and if the market price goes too high then you can cancel your order and wait for the price to drop before reactivating the order as in the end you want to end up with more than you have spent.

In our test we have spent 0.01682019 BTC for renting X11 hashrate at 1.1 BTC per GH per Day and the resulting mined DarkCoins wih the rented hashrate was a little over 1.2 DRK which converted on the DRK/BTC exchange rate was 0.01595322 BTC. We could’ve made a bit more if we have spread our hashrate for longer period of time with a lower limit than and we’ve started without a limit at first, so initially we got about 1 GHS worth of hashrate thrown at the pool and it was able to handle it. Again we advice to use a limit and not set the limit too high, even better start with a small limit and adjust it based on the results you are getting. Once you make a few orders you will get better, so do the first ones with a small amount so that if you mess up the order parameters the loss will be small in the worst case scenario.


Moving on to the renting part, we have decided to test out renting a single GeForce GTX 780 Ti video card that produces about 4.6 MHS for mining X11 crypto coins such as DarkCoin. Do note however that it is not that wise to rent Nvidia GPUs for X11 hashrate as you need to use ccminer and it currently does not support backup pools, so if NiceHash is not providing work for you the card cannot switch to a backup pool and will stay idle and this is something that you do not want. Still this may not happen if you keep selling your hashrate, unless you decide to set a minimum for the price you are going to be selling your hashrate. Normally, unless there are no orders left your hashrate will be sold, though it might not be at the highest market order for the moment – this is something you can keep track in the status page for your account. Since selling of hashrate does not require you to register at NiceHash you need to find your status page by looking for your username which is also the Bitcoic payment address that you have set at the software miner. Do note that the service applies 2% fee for renting hashrate as well as for buying it, you will notice the subtraction of the fee when payment is processed. Also payments are made few times a day if your balance exceeds a certain minimum, different for each algorithm and you can read about them in the FAQ.

In our first 24 hours selling our hashrate of about 4.6 MHS we’ve managed to earn 0.00490318 BTC, so not so bad. Do note that the market price was about 1.1 BTC when we started renting the hashrate and in the next 24 hours with the market price increasing to about 2.6 BTC at the end of the period we have earned 0.0079467 BTC or significantly better than for the first day. In fact if you want to make some good profit it may be wise to sell your X11 hashrate than to directly mine for DarkCoin for example as at the moment the interest is high and in the short term you can get more BTC than directly mining for DRK and exchanging them immediately after that or for using a multipool with direct BTC payout.

Our conclusion, NiceHash is really a good alternative to multipools and cloud mining service providers or mining rig leases and if used right it can give you some nice profit, regardless if you buy hashrate or sell your hashrate. It provides you with a great opportunity to mine a lot of a new coin at launch time if you do not have a lot of hashing power yourself or to maximize the profit from the hashrate you currently own easier than to always look for new coins to throw your hashrate at. There are also some things that can still be improved, for example if you have registered to link your account to the selling hashrate functionality and thus be able to use the generated BTC from selling for buying hashrate as well should you wish to do so. Generally however we’ve had no problems using NiceHash and we like how things are working out already. So if you still haven’t checked out the service we do recommend to do so now.

To check out the NiceHash service for buying or selling hashing power…


LeaseRig is an interesting new service that allows you to rent mining rigs for a limited time period that will mine for you in your preferred pool and your preferred crypto currency for the duration of the lease. There are mining rigs available for Scrypt, SHA-256, Scrypt-Jane, Keccak (SHA-3), Scrypt-A-nFactor and DRKMix (Darkxoin mining). These rigs are provided by users and the service LeaseRig only connects you to the mining rig providers, processing payments and acts as control and monitoring panel. Everything seems very quick and easy to start using the service if you want to rent mining rigs and there are already quite a few available, and we were very excited at first. This is precisely why we have decided to give the service a try by renting a mining rig for 24 hours to be able to actually test how things are working and give you adequate feedback and to make a proper review of the service.


In order to test the service we have decided to lease a smaller mining rig for longer period of time, so we choose one that is with 0.62 MHS and have rented it for 24 hour time period. The cost for leasing the rig for 24 hours was 0.01070000 BTC (you can pay only in BTC), and estimating the LTC return rate for 24 hours of mining Litecoin with that hashing power was roughly 0.1945 LTC (0.00485666 BTC). This means if we used the rig to mine LTC the profit we would get will be about half of what we have payed for renting the mining rig, so we have decided to go for the currently more profitable DOGE. The projected mined crypto with that hasrate for a day by the pool (Coinotron) was about 2600-2700 DOGE or up to about 0.00567000 BTC with the current exchange rate. Again less than what we have to pay for renting the mining rig, but we decided to give it a try as we were actually willing to test the service… you can find better prices for higher hashrate and with longer lease time you can end up with profit according to calculations.


Everything started very good, the BTC deposit has appeared and was available for use very fast. We have hired the mining rig, removed the rigs default pool settings and set our pool and worker settings for mining DOGE at Coinotron and in a moment the rig started working. For a few hours everything was running smooth and problem free, so we stopped checking the Mining Rig status every few minutes and a few more hours later we checked to see if everything is still fine and it was not. The mining pools and settings were back to the default ones for the mining rig we have rented and it was not mining to our pool (it was gone from the list of pool) and was mining for the rig owner with more than 12 hours left from our contract. This has probably continued for an hour or two at least before we have noticed it, we again changed the pool settings to ours for mining DOGE in Coinotron and have removed the default ones. After that going for some sleep and waking up in the morning and checking the status with just about 2 hours more left from our lease the rig was again back to the default pools and our mining pool info was not in the list and it was not mining for us. This meant that again the rented rig was not mining for us for at least a few hours, again setting the proper settings for the remaining time of our contract and there were no more problems until the lease time has finished.


The result from our 24 hour rent of the mining rig was really awful. Instead for the projected 2600-2700 DOGE getting mined for the lease time, we ended up with only about half of that actually mined or about 1300 DOGE. This means that due to the two times that our pool settings were gone and the mining rig was not mining for as as per the contract before us noticing has totaled in probably 12 hours. This is really unacceptable, even though after our contract has finished we can still see the leased mining rig mining for us at the Coinotron pool with a slightly lower hashrate for about an hour already we are still not happy at all.

After reading a bit more, it seems that the problem with the pool settings getting reverted back to the default set by the mining rig operator can happen if you restart the miner on the rig and you need to manually reset them to your own settings each time. So if the mining rig does not get restarted or the miner software on it at least you might not have the problem with the pools reverting back to the owner of the rig, but in hour 24 hour test we have noticed this happening 2 times (maybe even more) and thus resulting in really very unsatisfactory performance of the service. You cannot expect the people that rent the rigs to be monitoring them all the time during the lease period, especially if you rent multiple rigs and for longer periods of time in order to quickly react should a problem with the pools reverting form the user set ones to the rig’s defaults.

The conclusion: we have started by renting a 0.62 MHS mining rig for 24 hours paying 0.01070000 BTC, we have mined Scrypt crypto and more specifically DOGE as it has higher profitability than LTC and at the end of our lease we have ended up with the equivalent of 0.00252630 BTC. So we actually have payed 4 times more than what our actual mining earnings are worth and that is clearly not going to make us recommend the LeaseRig service. We have ended up with half of the expected DOGE mined because of a problem with the system that reverts the mining pools to the mining rig’s defaults instead of using our mining pool and worker, so this has essentially halved our expected earnings. So for now you better not go for the LeaseRig service, until at least they figure a solution to the problem with the pools getting reset. But even without that pool issue we have experienced it is hard to go for a lease of a rig that will not only cover what you have payed for renting it, but will end up with some profit for you! You could actually be more interested in becoming one of the mining rig providers and earn some cash for leasing your mining rig equipment, because this actually seems more profitable than to be renting rigs.

Other similar services offering Renting of Mining Rigs or Hashrate: