ON the Subject of ” BEAM ” my strong advice is to walk away from mining this coin.
Pool Payout Transactions are ” Disappearing ” as of 14 Feb.19 and those disappearing funds also are disappearing from my wallet with no good answers coming forth from either the Pool Operators or the DEV Team. The Dev Team in fact either could care less or is too understaffed to deal with the current level of difficulty resulting from gross blunders in Engineering. What I will have to be forced to say on this matter is that Records of Coins ” Payed ” out cannot be compiled strictly from the block chain which appears to be the case. The Pool payout record has to be ” Unalterable ” after ANY ledger entry has been made and the pool must have its own database that can be ” gone back to.” Why this is not built into the architecture is anyones guess, but it always has to do with a failure to allocate the necessary hardware resources and labor to ensure that things are done above board.
On 14 Feb.19 I received a pool payout and my wallet balance showed 101.87 BEAM. The next morning I opened the Pool interface to see TOTAL PAYOUTS had gone down to 81.50 BEAM, and My wallet reported the exact same thing. 20.37 Beam missing and no one on the pool or at BEAM has any answers or cares to answer in a timely manner. These are the simple facts.
Star

Hello All: I’ve tried to get my 2 card rig working but LOL miner keeps timing out. I started from scratch and this is the cleanest I have and it goes through most after running the bat file but still timesout and stops.

SUCCESS: Specified value was saved.

SUCCESS: Specified value was saved.

SUCCESS: Specified value was saved.

SUCCESS: Specified value was saved.

SUCCESS: Specified value was saved.

The LolMiner logo

Reading pool data from command line

lolMiner is configured to mine Beam(Beam), Equihash 150/5 – Beamhash

Setup Miner….

then times out.

My run_miner.bat file is:

@echo off

setlocal enableDelayedExpansion

Rem #################################

Rem ## Begin of user-editable part ##

Rem #################################

Rem Insert your configuration file name here

rem set “PROFILE=MiniRig”

Rem #################################

Rem ## End of user-editable part ##

Rem #################################

rem set “PARAMS=–profile %MiniRig%”

setx GPU_FORCE_64BIT_PTR 1

setx GPU_MAX_HEAP_SIZE 100

setx GPU_USE_SYNC_OBJECTS 1

setx GPU_MAX_ALLOC_PERCENT 100

setx GPU_SINGLE_ALLOC_PERCENT 100

REM lolMiner.exe !PARAMS!

lolMiner.exe –profile MiniRig –coin BEAM –pool beam-us.leafpool.com –port 4444 –user 3xxxxxx

timeout 10

My user_config.json is:

{

“DEFAULTS” : {

“DEVICES” : “AUTO”,

“APIPORT” : 0

},

“MiniRig” :

{

“COIN” : “BEAM”,

“POOLS” : \[

{“POOL” : “[beam-us.leafpool.com](https://beam-us.leafpool.com)”,
“PORT” : “4444”,

“USER” : “3xxxx”,

“PASS” : “x”}

\]

}

}

What is it stopping this from running! When I use Open CL it works fine but the hashrate is 15%+ better I have seen using LOL miner.