New Raspberry Pi 3 Announced, Faster and with WiFi and Bluetooth

29 Feb
2016

raspberry-pi-3-model-b

Most crypto currency miners should be very familiar with the Raspberry Pi, the small and inexpensive Linux-based “computer” that is often used to run big ASIC miners without the need of a dedicated powerful PC. The RPi however can be used for other things such as running a full Bitcoin or other crypto currency node with the help of a large USB drive or running a wallet for PoS for example. So the announcement of a new faster Raspberry Pi 3 could be of interest to a lot of people, especially considering the fact that the new model comes with built-in WiFi and the price remains the same as with the old model 2 – $35 USD, with the RPi 2 still available for anyone that needs it.

Raspberry Pi 3 Specifications:
– Processor: Broadcom BCM2387 chipset, 1.2GHz Quad-Core ARM Cortex-A53, 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)
– GPU: Dual Core VideoCore IV Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode. Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure
– Memory: 1GB LPDDR2
– Operating System: Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT
– Dimensions: 85 x 56 x 17mm
– Power: Micro USB socket 5V, 2.5A

Raspberry Pi 3 Connectors:
– Ethernet: 10/100 BaseT Ethernet socket
– Video: Output HDMI (rev 1.3 & 1.4 Composite RCA (PAL and NTSC)
– Audio Output: Audio Output 3.5mm jack, HDMI,
– USB: 4 x USB 2.0 Connector
– GPIO Connector: 40-pin 2.54 mm (100 mil) expansion header: 2×20 strip providing 27 GPIO pins as well as +3.3 V, +5 V and GND supply lines
– Camera Connector: 15-pin MIPI Camera Serial Interface (CSI-2)
– Display Connector: Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane
– Memory Card Slot: Push/pull Micro SDIO

The dimensions and layout of the new Raspberry Pi 3 Model B are the same as with the RPi 2 Model B including the connectors, so it should be compatible as a direct replacement for the older unit if you are already using it for a project. The faster CPU can be a good upgrade for tasks requiring more processing power such as running a crypto currency node, the GPU is the same as with the old model, but clocked higher and you get WiFi and Bluetooth built-in for easier wireless network and peripheral connectivity.

For more details about the announcement of the new Raspberry Pi 3 Model B…






Check Some More Similar Crypto Related Publications:

Leave a Reply

Your email address will not be published. Required fields are marked *

top