New PascalCoin (PASC) Pool with Stratum Support and AMD/Nvidia Sgminer

30 Jan

Another PascalCoin (PASC) pool, one brought by Suprnova, seems to be now open for beta testing, though apparently not fully functional. The new pool brings much better support and functionality as compared to the first available pool from Nanopool, so you might want to check it out. The PASC Suprnova pool offers Stratum support and comes with the familiar sgminer with support for mining PascalCoin on both AMD and Nvidia GPUs, though apparently a version of ccMiner will also soon be available for Nvidia miners… there is also a Windows and Linux miner available.

The pool has not yet found its first block and the payment part does not seem to be fully functional yet, but you can still try the miner and point some hashrate to help in testing things out. The pool fee is 1% and you should be able to do manual payout and not have a minimum payout limit, also stats is working much better and reported hashrate is quite accurate on miner/poolside, the stratum support also should ensure better efficiency. We have given a try of the Windows miner and have noticed it does tend to have a pretty high CPU and memory usage, but it does still seem to work well.

You can check out the new PascalCoin (PASC) mining pool at Suprnova here…
Here is a 64-bit Windows binary of the sgminer fork with PascalCoin support for the pool…

Other Similar Publications:

15 Responses to New PascalCoin (PASC) Pool with Stratum Support and AMD/Nvidia Sgminer


January 31st, 2017 at 13:56

On Screenshot the result of gtx 1070?


January 31st, 2017 at 14:35

Yes, but this is not the best performance you can get out of them, you can get even better results on Nvidia with (900+ with no OC):

sgminer.exe -k pascal -o stratum+tcp:// -u yourworker.1 -p password -I 24 -w 1024


January 31st, 2017 at 15:58


January 31st, 2017 at 16:16

Deathcult i have gtx 1070 but i have problem with miner can you paste plase your bat


January 31st, 2017 at 16:29

My gtx 1070 crash , have HIGH rejected over 100% , and the computer is VERY SLOW , i have CELERON and 8gb ram with 3 gtx 1070 on windows x64 .

pls send .bat for good work on suprnova .


January 31st, 2017 at 16:50

As noted in the post the miner is CPU intensive and has high memory usage at the moment, so it can use some extra optimization, especially for slower processors and multiple GPUs. There is a working config for gtx 1070 in the second post.


January 31st, 2017 at 16:58

with :

sgminer.exe -k pascal -o stratum+tcp:// -u yourworker.1 -p password -I 24 -w 1024

Have only rejected and the pc is VERY SLOW .


January 31st, 2017 at 17:34

I understand the problem , work fine with only 1 card , use comand –device , its ok , with 3 card the cpu dont work fine and pc very slow and only rejected . Pls fix it .


January 31st, 2017 at 19:24

Guys, where I can get nvidia sgminer for mining pascal on suprnova?


January 31st, 2017 at 19:55

There is only one version that works on both AMD and Nvidia, we are waiting for a ccMiner fork for Nvidia.


February 1st, 2017 at 02:40

but dont work un my nvidia card


February 1st, 2017 at 07:15

It doesn’t run with my gtx 1070 / win7


February 1st, 2017 at 15:09

@aku8311 i’m use : “sgminer.exe -k pascal -o stratum+tcp:// -u xxxx.xxxx -p xxxx -I 24 -w 1024 -g2”
but downgrage the “I” like I 21 if you have probleme of stability and delete all your .bin in the folder after change command.
good luck :)


February 2nd, 2017 at 04:33

was anyone able to get sgminer working to solomine pascal ? if so please leave your bat info


February 2nd, 2017 at 14:04

Here are my results from Asus Strix GTX 1070 OC 8GB –

I used the command from the second post

sgminer.exe -k pascal -o stratum+tcp:// -u yourworker.1 -p password -I 24 -w 1024

Leave a Reply

Your email address will not be published. Required fields are marked *