Posts Tagged ‘Bitcoin ASIC firmware

There is a new major release of the Braiins OS open source miner firmware for Bitmain’s most popular S9 series of ASIC miners available now. In fact there are now two different versions available Braiins OS community edition and Braiins OS+ enterprise edition, both available for free, with a different feature set and some specifics we’ll cover in a moment. You can use the new Braiins OS or OS+ to replace the original Bitmain firmware on Antminer S9, S9i and S9j and soon hopefully the newer S17 and T17 models will also be supported along with other devices in the future. Braiins OS is fully open-source and customizable so you can tweak it to fit your needs, it supports AsicBoost, supports Stratum V1 and V2 implementation, uses a custom BOSminer developed from scratch in Rust and provides some extra useful features that can help you tweak your ASIC miners and get more of your hardware. The Braiins OS community edition is completely free and open-source without the need to pay for it or any developer fees, unlike the case with some other custom firmware solutions.

The new Braiins OS+ enterprise edition is built on top of the standard community editions and has some extra features available, most interesting of which are the auto-tuning feature to increase hashrate and the low power mode for maximum efficiency as well as the pre-heat option. The rest is like in the standard edition, but the extra features allow you to tweak even better your performance or energy efficiency, depending on your specific needs. The small catch with the Braiins OS+ enterprise edition is that for the extra features you get you will have to agree to the 2% built-in developer fee, however you will also get a 50% reduction (from 2% to 1%) of the pool fee if you use the miners with Braiins OS+ on the Slush Pool for mining. Thanks to the auto-tuning feature in which algorithms automatically evaluate the optimal frequencies for hashing chip-by-chip, instead of treating the entire machine as one single unit the extra performance you may get from a miner should be much more than the fee that you will need to pay.

For more information and to download and try the new Braiins OS and OS+…

The Braiins OS is an alternative opensource OS for Bitcoin ASIC miners and more specifically for Antminer S9 and DragonMint T1 with support for AsicBoost. The initial release was not that easy to install and use, but looked very promising, but in December last year the second major version named Braiins OS Cobalt was made available and it made things much easier for everyone to switch from the factory firmware. The initial Cobalt release however was missing a crucial feature as we have noted and that was manual fan control as by default the automatic control was keeping high operating temperatures and fans spinning at lower RPM. This has been fixed in the new second release along with some more useful features and improvements worth upgrading to the new release or switching from the stock firmware. If you want to read the full list of what is new in the latest Braiins OS Cobalt release.

In the latest version you have the option to use either Automatic Fan Control or set Fixed Fan Speed. In automatic mode you can set the desired temperature and the fan controller will try to keep as close as possible to that temperature by varying the fan speed. The fixed speed mode is set in percentage and the fans will operate at the set value regardless of the temperature, so you need to be careful with this mode, though setting at 100% target fan speed should be pretty safe. Do note that the operating temperature depends not only on the cooling fans of the miner, but also on the ambient air temperatures and other factors.

Another new interesting feature is the new frequency scaling mode that is essentially an overclocking multiplier allowing you to set an overclock by a constant factor for all of the miner chains at once over the overclock settings you may have individually set already. Overclocking is easier in the new release as you are able to lower the temperatures by manually controlling the fan speeds now thus getting more headroom for overclocking. When overclocking also make sure that not only the cooling can handle things, but also the power supply you are using is sufficient enough as well, especially if you start increasing the operating voltages as well and not only the frequencies.

For more details about the new Braiins OS Cobalt release for S9 and T1 ASIC miners…

Braiins OS has just released a new update to their alternative opensource OS for Bitcoin ASIC miners available for Antminer S9 and DragonMint T1 with support for AsicBoost support enabled. The new Braiins OS Cobalt is here to replace the previous released called Wolfram bringing some improvements such as new status page, per chip frequency calibration for S9, improved bulk upgrades and full compatibility with the Awesome Miner management app.

The Cobalt update brings multiple ways of upgrading your ASIC miners from their stock firmware including a version that can now directly be flashed via the stock firmware’s update feature for a really easy deployment. Installing from a PC with Windows is now easier as with the previous release you had to use a Linux PC to deploy the Braiins OS software to your miners and that was not always an easy to do thing for many people. Here you can find more details on how to install Braiins OS Cobalt on the compatible Bitcoin ASIC miners using al supported methods.

Braiins OS uses over (version-rolling) AsicBoost in accordance with BIP310, so in order to take advantage of that feature that essentially reduces power usage while maintaining the same hashrate you should go for a mining pool that supports it. With Braiins OS you have easy per chain control of the operating frequency and voltage of the miner, though you should be extra careful when playing with these in order to be on the safe side. The ASIC Boost is enabled by default, so if you are having trouble connecting to a mining pool then it most likely does not support AsicBoost and you may have to disable it from the settings.

One thing however that is still missing in the updated Braiins OS is a user control feature for the cooling fans, the operating system uses automatic fan control maintaining low RPMs and higher operating temperatures. When increasing the voltage and frequency of the miner by overclocking it will compensate with higher RPMs for the fans, but the temperature will still be maintained pretty high for our taste. Unfortunately there is no option to force it to 100% fan for example via the web interface and in our opinion this is a must have feature that is still missing. Other than that we like what we are seeing from Braiins OS and how it is improving with new releases, so if you still have not tried it you might give it a go as an alternative for the stock firmware from Bitmain’s S9 or Halong Mining’s T1.

For more details about the new Braiins OS Cobalt release for S9 and T1 ASIC miners…