Posts Tagged ‘Bitcoin Diamond’

WildRig Multi 0.24.0 Beta AMD GPU Miner With Improved KAWPOW Performance

17, May 2020

The latest WildRig Multi 0.24.0 Beta AMD GPU miner is just what the doctor ordered for Ravencoin (RVN) miners with AMD GPU as it is taking the top spot in terms of hashrate with the latest performance updates. At least with the default settings it is on par with what the previous fastest AMD miner for KAWPOW – nanominer manages to provide you in terms of hashrate on RX 4×0/5×0 series of GPUs, as far as the newer Navi cards are concerned it is possible that the latest nanominer is still better. The new version also brings two alternative kernels for KAWPOW that you can try to see if you can get a bit of extra performance from your hardware, you can set them with the --progpow-kernel command line option with values 1 and 2 respectively. The second one worked better in our tests providing us with higher and more stable hashrate compared to the first and the default kernel.

The latest WildRig Multi is currently available for Windows, Ubuntu Linux and HiveOS as a closed source binary and with a 1% developer fee built-in by default, however have in mind that the following algorithms are still with 2% dev fee – lyra2TDC, sha256csm, x17r and wildkeccak.

– To download and try the latest WildRig Multi 0.24.0 Beta AMD GPU multi-algorithm miner…

New z-enemy 2.6.1 Nvidia GPU Miner With Improved KAWPOW Support

14, May 2020

A couple of days ago the z-enemy 2.5 miner was released as an updated version that introduced support for the KAWPOW algorithm that Ravencoin (RVN) has forked a couple of days ago. The z-enemy miner was not the first to support KAWPOW and was not the fastest as we were kind of used to often see when RVN was using the older X16 algorithm. It is good to see that more work has been put to the miner and the latest z-enemy 2.6.1 is right on rack to regain its fame from the good old days of Ravencoin mining when it was our preferred choice for a X16 miner.

The latest updates of the z-enemy regarding KAWPOW support bring faster initialization on multi-gpu rigs, performance improvements of a few percent, smoother gpu/power load and higher default intensity value increased from 20 to 21 for GTX 1070/1080 series as well as some miscellaneous improvements in the miner interface and general features. As far as performance is concerned, we definetly see an improvement, though still a bit more hashrate boost might be required for the miner to reclaim its top performance place.

The latest z-enemy version 2.6.1 is available for Nvidia CUDA 9.1, 9.2, 10.0 and 10.1 for 64-bit Windows versions and Linux. Make sure that you have the respective recent video driver version installed for the CUDA version you want to use – 388+ for 9.1, 397+ for 9.2 and 411 or newer for CUDA 10.0 or the latest ones for CUDA 10.1. We remind you that the z-enemy is a closed source miner software, is available only as a binary release, supports only Nvidia GPUs and it also contains a 1% developer fee built-in to support further software development.

– To download and try the latest z-enemy 2.6.1 Nvidia GPU miner (Linux/Windows)…

WildRig Multi 0.23.0 Beta AMD GPU Miner With KAWPOW and ProgPoW Support

9, May 2020

The latest WildRig Multi 0.23.0 Beta AMD GPU miner has added support for the the KAWPOW algorithm now used by RavenCoin (RVN) as well as ProgPoW used by Super Zero (SERO). The latest release also adds --benchmark option for ProgPoW algorithms (including KAWPOW) as well as added --benchmark-epoch option for estimated hashrate benchmark results for specific upcoming epoch number. The WildRig Multi is the third option for AMD GPU miners to mine the new KAWPOW algorithm and unfortunately is currently the slowest in our tests on AMD Radeon RX 580 8GB GPUs. The fastest one for AMD GPU miners currently seems to be nanominer followed closely by NBMiner. Still you might want to test and compare performance on your AMD GPUs to see what works best out of the three options as on different AMD GPUs there cold be difference in the hashrate with each of the miners.

The latest WildRig Multi is currently available for Windows, Ubuntu Linux and HiveOS as a closed source binary and with a 2% developer fee built-in by default, though it can be lowered to 1% using --donate-level=1. Only the wildkeccak algorithm is with fixed 2% dev fee with no possibility to be changed by the user using the command line parameter.

Update: The newer version 0.23.1 does bring a bit of a performance boost, but we are also seeing a lot of low difficulty share errors with it, so probably not quite there yet to compete with the alternatives! Also a good news is that the default dev fee has been lowered to 1%, so no need to use the extra command line option to do that manually anymore.

– To download and try the latest WildRig Multi 0.23.0 Beta AMD GPU multi-algorithm miner…


top