Posts Tagged ‘Bitmain AntMiner T9’

New Bitmain AntMiner T9 ASIC Miner Offering 11.5 THS Hashrate

17, Jan 2017

Bitmain has announced a new AntMiner T9 ASIC miner that should go on sale today for $1104 USD offering 11.5 THS hashrate. The new miner is based on the previous AntMiner S9, though it comes with a bit less chips that are apparently clocked at a higher operating frequency. The new T9 is a bit cheaper, but not as efficient as the S9 as based on the official specs it consumes about 1450W for the 11.5 THS while the Batch 22 of the S9 came with 11 THS at 1078W and Batch 23 was with 14 THS for 1372W. The new T9 miner comes with just 171 BM1387 chips while the S9 was based on 189 BM1387 chips. The two fans cooling the new device are the same as on S9, so you can expect similar level of noise from the device. So in short the new AntMiner T9 does not in fact seem so attractive to miners, but with the lack of new S9 miners you might not have much of a choice…

BitMain AntMiner T9 Specifications:
– Hash Rate: 11.5TH/s. A variation of +/- 5% is expected
– Power Consumption: 1450W +7% (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temperature)
– Power Efficiency: 0.126J/GH + 7% (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temperature)
– Rated Voltage: 11.60 ~ 13.00V
– Chip Type: BM1387
– Chip quantity per unit: 171 chips
– Dimensions: 350mm (l) x 135mm (w) x 158mm (h)
– Cooling: Two 12038 fans. Front fan: 6000RPM, rear fan: 4300RPM
– Operating temperature: 0°C to 40°C
– Network connection: Ethernet


top