Posts Tagged ‘Bytom mining

The latest NBMiner 29.0 update comes with added support for the KAWPOW algorithm that is going to soon be used by RavenCoin (RVN)… most likely. The KAWPAW algorithm is based on ProgPoW with some parameters specific for Ravencoin, so a regular ProgPow miner won’t do. So now, besides the official kawpowminer and the recently released Gminer with KAWPOW support you also have a third alternative in the form of the latest NBMiner and others will most likely follow as well. It seems however that all of the miners could be based on the same reference ProgPow codebase and there is currently not much of a performance difference apparently, so it is more like which one you are more used to. Below you can see an official list of the expected performance on popular mining GPUs at default stock settings for the KAWPOW algorithm when using NBMiner:

NBMiner 29.0 KAWPOW Expected Performance:
– Nvidia P106-100: 10.3 MH/S
– Nvidia P104-8G: 17.5 MH/S
– Nvidia GTX 1070 Ti: 13.3 MH/s
– Nvidia GTX 1080 Ti: 22.5 MH/s
– Nvidia GTX 2080: 25.8 MH/s
– AMD Radeon RX 580: 10.3 MH/s

We remind you that the NBMiner is a closed source GPU miner for Nvidia CUDA and now AMD as well that is available for both Windows and Linux operating systems and it has the following developer fee built-in: tensority_ethash 3%, tensority(Pascal) 2%, tensority(Turing) 3%, ethash 0.65%, cuckaroo & cuckatoo & cuckaroo_swap 2%, progpow_sero 2%, sipc 2%, bfc 3%, hns 2%, hns_ethash 3%, trb 2%, trb_ethash 3%, kawpow 2%.

To download and try the latest NBMiner 29.0 Nvidia and AMD GPU Miner for Windows/Linux…

It has been a while since we have covered new Bminer releases, so we are going t mention that there is new Bmine 16.1.0 that comes with added support for BFC and Cuckatoo32, as well as fixes fidelity issues on Cuckaroo29m and improved stability of ETH mining. As for the reason we haven’t covered this particular miner, it is not because of lack of updates, it is because of a specific issue that is still not fixed under Windows. So half of the reason is because we want to mention how users that are having issues running Bminer on their Windows-based Nvidia GPU mining rigs can resolve it now and not have to wait for a new version that finally fixes this.

If you run Bminer and get an error saying “Failed to initialize the CUDA platform: CudaError: Could not initialize the NVML library” then there is nothing wrong with your mining hardware, the problem is in the Bminer. The reason is that newer Nvidia GPU drivers have moved the nvml.dll library that the miner uses into a new location and Bminer is looking for the NVML dynamic link library in a specific location, so even if you copy the DLL file in the same folder where the miner is it will still not work. If you are using newer Nvidia drivers you will have to copy the “nvml.dll” file from the “\Windows\System32\” folder to “\Program Files\NVIDIA Corporation\NVSMI\” and have in mind that you need to create the NVSMI folder there as it will not exist and then copy the DLL. Running Bminer after copying the library (do not move the file, or other programs might stop working properly, just copy it!) to the specified folder should eliminate the error message and the miner should start normally again.

We remind you that that Bminer is a closed source Nvidia GPU miner available for Linux and Windows in the form of pre-compiled binaries and that there is a 2% development fee for Grin, Beam, Bytom (BTM), Equihash and Zhash coins, 0.65% for Ethash and 1.3% for dual mining Ethash and Blake.

To download and try the latest release of the Bminer 16.1.0 Nvidia GPU miner…

The latest NBMiner 27.7 update comes with improvements for Handshake (HNS) and HNS + ETH Dual mining on Nvidia GPUs, bringing a bit better performance as well as some fixes like for the NVML initialization failure on certain cases and for ETH mining on NiceHash. With the latest performance improvement NBMiner 27.7 is again taking a lead for Handshake mining performance from the latest GMiner. With the latest performance improvements a mining rig with 6x 1080 Ti’s gets closer to what Blackminer’s FPGAs with HNS support, though GPUs are still a bit slower and with a bit higher power usage. Nevertheless mining HNS now may still be worth it with the expected availability of the first Handshake ASIC miner sometime in June.

We remind you that the NBMiner is a closed source GPU miner for Nvidia CUDA and now AMD as well that is available for both Windows and Linux operating systems and it has the following developer fee built-in: tensority_ethash 3%, tensority (Pascal) 2%, tensority (Turing) 3%, ethash 0.65%, cuckaroo & cuckatoo & cuckaroo_swap 2%, progpow_sero 2%, sipc 2%, bfc 3%, hns 2%, hns_ethash 3%.

To download and try the latest NBMiner 27.7 Nvidia and AMD GPU Miner for Windows/Linux…


top