Posts Tagged ‘CNv4’

Team Red Miner 0.6.0 With Support for the Ethash Algorithm

22, Nov 2019

Team Red Miner is a performance optimized cryptocurrency miner for AMD GPUs with support for lyra2rev3, lyra2z, phi2, CryptoNight v8 (CNv2) and CryptoNight R (CNv4), X16 variants, MTP, Cuckarood29 and Cuckatoo31 and now adding Ethash support as well in the latest 0.6 release. The miner is available for both Windows and Linux operating systems, a closed source software with 2.5% to 3% development fee built-in for all algos except Ethash, for Ethash on Polaris GPUs the dev fee is 0.75% and on all other GPUs is 1.0%.

A quick test of the Team Red Miner 0.6.0 for mining ETH (current DAG 299) on AMD Radeon RX 580 8GB GPUs has shown hashrate very similar to what other Ethash miners are capable of delivering on the same hardware, so performance wise things seem to be very good. Of course why to switch from one Ethash miner that you might be already familiar with such as Claymore’s Dual Miner to another that has just introduced support… that is up to you to decide, though you should give it a try.

– To download and try the latest Team Red Miner 0.6.0 with Ethash support…

Source: Bitcoins mit PayPal kaufen

New SRBMiner 1.8.8 Cryptonight AMD GPU Miner With Optimizations Reducing CPU Usage

7, May 2019

The latest CryptoNight AMD GPU miner SRBMiner 1.8.8 comes with a significantly reduced CPU usage of up to ~50% that can be noticed on CryptoNight algorithms with small scratchpad like UPX2 and Turtle for example. This can be helpful on GPU mining rigs where the CPUs are struggling to provide enough performance and as a side effect there could be a slight performance boost for RX cards on UPX2. The new version brings some usability and functionality changes as well to make the use of the miner easier and more problem free.

You can find the full changelog for the latest release quoted below. Do note that the developer fee is ~0.85% for both normal mode and algorithm switching mode as SRBMiner is a closed source miner available for AMD GPU miners only under Windows.

SRBMiner V1.8.8 Full Cangelog:
– Reduced CPU usage up to ~50%, can be noticed on algos with small scratchpad
– User is now informed about tweaking status on the screen too, not just in log
– No more --gpureorder, device ordering by bus id is now the default/only display mode
– Added parameter --watchdogrounds, which controls after how many rounds will watchdog trigger
– min_rig_speed_duration default is 1 minute now, because of the new --watchdogrounds parameter
– Fixed a few cosmetical things on web stats

– For more information about the latest SRBMiner Cryptonight AMD GPU Miner V1.8.8…

New SRBMiner 1.8.4 Cryptonight AMD GPU Miner With Performance Boost for HBM-based GPUs

21, Apr 2019

The latest version 1.8.4 of the CryptoNight AMD GPU miner SRBMiner brings significant performance boost for all of AMD’s HBM memory based GPUs, namely the Radeon Vega56, Vega 64, Vega FE and the latest Radeon VII with HBM2 video memory. The performance boost for these video cards can be up to about 15%, so definitely worth upgrading any mining rigs with the newly released miner for the extra hashrate you will be getting… and that apparently goes for all of the supported algorithms! To take advantage of the extra performance boost you need to play around with the new parameter tweak_profile checking the level of tweak profile that your GPUs can handle and applying it. Apparently the improvement is based on memory timings modification thanks to the work of Eliovp and his useful AMD Memory Tweak Tool.

You can find the full changelog for the latest release quoted below. Do note that the developer fee is ~0.85% for both normal mode and algorithm switching mode as SRBMiner is a closed source miner available for AMD GPU miners only under Windows.

SRBMiner V1.8.4 Full Cangelog:
– Performance increase for Vega56/64/Fe/Vii up to 15%!
– Minimum for ‘main_pool_reconnect’ is now 60 seconds instead of 180
– Added new cmd parameters: –disabletweaking, –cgputweakprofile
– Added new config parameter: tweak_profile
– Minor bug fixes

– For more information about the latest SRBMiner Cryptonight AMD GPU Miner V1.8.4…


top