Posts Tagged ‘Ethereum miner’

TeamRedMiner 0.7.1 With Support for the KAWPOW Algorithm

19, May 2020

Team Red Miner is a performance optimized cryptocurrency miner for AMD GPUs with support for a number of algorithms with the latest version 0.7.1 bringing support for the KAWPOW algorithm used by Ravencoin (RVN) as well as introduces support for Navi GPUs for KAWPOW and Ethash. TeamRedMiner is the 4th software (after WildRig Multi, nanominer and NBMiner) for mining Ravencoin (RVN) after its fork to the new KAWPOW algorithm on AMD GPUs. And it certainly makes a good appearance with its initial support getting it the top spot in terms of performance at least in our test o RX 580 GPUs where it outperformed the competition with at least 1 MH/s over the second fastest miner.

Expected hashrates for KAWPOW:
– RX 5700XT: 28+ MH/s
– Radeon VII: 40+ MH/s
– RX Vega56/64: 25+ MH/s
– RX 580: 14+ MH/s
– RX 570: 13+ MH/s

The miner is available for both Windows and Linux operating systems, a closed source software with 2.5% to 3% development fee built-in for all algos except Ethash and KAWPOW, for KAWPOW it is 2% and for Ethash on Polaris GPUs the dev fee is 0.75% and on all other GPUs is 1.0%.

– To download and try the latest TeamRedMiner 0.7.1 with KAWPOW support…

Team Red Miner 0.6.0 With Support for the Ethash Algorithm

22, Nov 2019

Team Red Miner is a performance optimized cryptocurrency miner for AMD GPUs with support for lyra2rev3, lyra2z, phi2, CryptoNight v8 (CNv2) and CryptoNight R (CNv4), X16 variants, MTP, Cuckarood29 and Cuckatoo31 and now adding Ethash support as well in the latest 0.6 release. The miner is available for both Windows and Linux operating systems, a closed source software with 2.5% to 3% development fee built-in for all algos except Ethash, for Ethash on Polaris GPUs the dev fee is 0.75% and on all other GPUs is 1.0%.

A quick test of the Team Red Miner 0.6.0 for mining ETH (current DAG 299) on AMD Radeon RX 580 8GB GPUs has shown hashrate very similar to what other Ethash miners are capable of delivering on the same hardware, so performance wise things seem to be very good. Of course why to switch from one Ethash miner that you might be already familiar with such as Claymore’s Dual Miner to another that has just introduced support… that is up to you to decide, though you should give it a try.

– To download and try the latest Team Red Miner 0.6.0 with Ethash support…

Source: Bitcoins mit PayPal kaufen

Updated Ethereum Ethminer with Nvidia CUDA Support

19, Aug 2015

ethminer-cuda-new

Genoil, the developer of the Ethminer fork with Nvidia CUDA support (source) has implemented some updates to the code of the project contributed by SP and tpruvot that reduce the load on the CPU when the miner is running. Also the default worksize has been increased form 64 to 128, but other than that there should be no changes affecting the performance of the miner. The reduction of CPU usage may come at the cost of slight hashrate drop, but there is a command line parameter now that you can use to stick with the higher CPU load and get the slightly higher performance --high-cpu-load, so it is up to you to decide. We have updated our package with Geth and Ethminer for OpenCL and CUDA with the latest version of the Ethminer CUDA binary for Windows (requires 64-bit Windows), so you can download and try it. The Ethminer CUDA fork should work on Compute 2.0 or newer GPUs, we have tested it with a Compute 2.1 and it is working fine, but don’t forget that you can run Ethminer in OpenCL mode as well on Nvidia-based video cards and not only on AMD if you are having trouble with the CUDA support or the hashrate you get is lower as compared to OpenCL.

– Download the updated Ethminer CUDA fork compiled for Windows and ready to be used…


top