Crypto Mining Blog
It Is All About BTC, LTC, ETH, DOGE, KAS mining as well as other alternative crypto currencies
Search
Posts Tagged ‘Gigabyte GPU mining’
It seems that Gigabyte is getting more serious in trying to get more of the mining market share for motherboards after they have left AsRock to dominate the mining motherboard market for a long time. They even lost positions to their main competitor – Asus and many other smaller manufacturers that entered the mining market. Gigabyte has been trying to get back on track with the last year’s release of the affordable Gigabyte GA-H110-D3A 6x PCI-E GPU Mining Motherboard and now it seems the company is also targeting the market for more than 6/8/9 GPUs on a single motherboard as well with their new Gigabyte GA-B250-FinTech motherboard for up to 12 video cards.
The new mining motherboard is based on the Intel B250 Express Chipset and is meant for use with Intel LGA1151 processors and DDR4 system memory. It comes with DSUB and DVI video outputs for the built in Intel graphics inside the CPU and there are two extra onboard 4-pin Molex power connectors for use if you don’t rely on powered PCI-E risers (not a very wise idea for 12 video cards), so you may skip them and just stick with powered risers. The rest is pretty standard configuration, though we should note that the motherboard does not seem to have an M.2 slot, so no option for extra 13th GPU or the ability to use an M.2 SSD drive and cut on extra cables.
The key selling point for Gigabyte with their GA-B250-FinTech 12x PCI-E mining motherboard is the cost savings you get when you use 12 video cards on a single board compared to two rigs with 6 cards each. While this is true, it is also worthwhile noting that 12 GPU mining rigs are larger and harder to maintain and support in case of trouble such as failed cheap Gigabyte Windforce fans for example.
Gigabyte is providing the so called Mining Kit with the GA-B250-FinTech motherboard that consists of a Front Panel Switch Card that comes with Power and Reset buttons. While this seems usable and convenient, it is actually not that functional as the board plugs into the Front Panel connector on the motherboard, so it will most likely still end under a GPU or near a PSU and it will not be very convenient for use. Getting a power button or even a power and reset button would be useful if they are with a decent length cable and you get the ability to position the button(s) in a convenient position on your rig. There are number of different mining rig designs, so adding useful flexibility with a power and/or reset buttons might be really useful, but not that much in the case of the Gigabyte Front Panel Switch Card. Sometimes one would think that these companies just don’t know what they are doing with their products, but then again they can always ask for help and support some miners to give them advice on what and how to do.
The other piece of hardware, if we can call it like that, that you get with the mining motherboard as a part of the Mining Kit is the 3-in-1 PSU Power-On Adapter. It is essentially a cable that allows you to power on one or two extra PSUs as soon as the main power supply turns on and this one is actually useful to have, especially if you build 12x GPU mining rig as you will most likely need more connectors than a single or even two power supplies can provide (depending on the GPUs you are using of course). So good job on this one Gigabyte, but you still might want to rethink the idea you have for the front panel switch card or actually make it more useful and functional for a wider number of users.
The last probably useful feature in the new Gigabyte GA-B250-FinTech motherboard for miners is the Mining Mode in the BIOS. A setting that should in theory make it easier for miners to setup the motherboard for use in mining rigs without having trouble when using more video cards, up to 12, though you can still use this motherboard with a smaller number of GPUs as well. The Mining Mode in BIOS has been available for a while on some Gigabyte motherboards that were not designed especially as mining motherboards, but have been proven to work well as such, so it is nothing that new anyway. People that have used Gigabyte motherboards for building mining rigs are probably already familiar with using that mode in the BIOS.
– For more details about the Gigabyte GA-B250-FinTech 12x PCI-E Mining Motherboard…
The chances are not many of you have heard about the Gigabyte GA-H110-D3A motherboard that is intended for 6x GPU mining rigs and the reason for that is probably the fact that Gigabyte hasn’t been promoting this product much as a mining motherboard. Gigabyte is a bit late on the GPU mining front with a motherboard designed for mining rigs with the GA-H110-D3A, even though the motherboard comes with up to date specs. That however does not mean that the company hasn’t been offering other higher-end products that are good to go for use for crypto mining, there are quite a few of these already and we have been using some of the models ourselves. The GA-H110-D3A however is still new for us and we are going to be giving it a try and sharing our experience with the motherboard pretty soon anyway.
The key thing about the Gigabyte GA-H110-D3A is that it comes at an attractive price and has all the features you need in order to build a regular GPU mining rig with 6x video cards. It is a basic motherboard with 6x PCI-E slots (single x16 and five x1 slots) that needs to be durable and reliable and be cost effective, so no shiny extras that you won’t be needing anyway for mining. The motherboard comes with a M.2 slot allowing you to use SSD in that format and save some extra space and cabling, especially power cables as they may be a problem in some situations. There are also a couple of things to make the product more attractive marketing wise, though you probably won’t benefit much from them such as USB 3.1 Gen1 support, high quality onboard audio design or a Realtek Gigabit LAN with cFosSpeed internet accelerator software. Some of the extra features might be actually helpful however such as Humidity Protection Glass Fabric PCB, High ESD Ethernet & USB Port Protection or High Temperature Protection Lower RDS(on) MOSFETs Design as often mining rigs are not working in the best possible conditions.
Gigabyte has an interesting microsite for mining that is centered on the H110-D3A motherboard, but also has some more useful information for other of the company’s products that can be used for mining. The most interesting part is probably the table listing 12 different Gigabyte motherboards with information on what BIOS version to use for mining and how many GPUs can be used on the specific model. Do note that there are some motherboards that do require the use of additional M.2 to PCI-E adapter in order to reach the listed number of GPUs. For example the Z170-Gaming K3 is one of the board that we have used a lot for 6x GPU mining that did not have support for more than six video cards up until BIOS F22, but now Gigabyte seems to be saying that it will work with F23a using an additional M.2 to PCI-E adapter (something we need to test). There are even some motherboards for up to 9x GPUs with dual M.2 adapters like the Z170X-Gaming 5 and Z170X-Gaming 6, though you might actually have a problem using all 9 under Windows for example.
– Here is the Gigabyte microsite with some information and tips regarding mining motherboards…