filmes porno buceta gostosa phim sex www xxnxx com xxxvideos porno Xvideos Com

Posts Tagged ‘Heatbit’

The Future of Space Heaters – Antminer S9 DIY Build by Crypto Cloaks

16, Jan 2023

Crypto Cloaks has just released the 3D printable STL files for their custom Bitmain AntMiner S9 modification from a noisy ASIC miner to a silent space heater that mines Bitcoin while keeping you warm during the cold winter days. They have already made available their DIY guide to help you build your own AntMiner S9 space heater even without the need of a custom case, but with the case that you can print yourself if you have access to a 3D printer – things not only work well, but also look well with your new space heater. The PDF includes their pretty detailed experience and tests during the creation process making it easier for anyone with a helpful walkthrough of the data collected and what you need and how to make your noisy S9 ASIC miner into a silent space heater that still manages to pay for the part of the electricity it uses thanks to the mined BTC.

Even if you do not own or have easy access to a 3D printer (like a friend that can print it for you) you can still order the case to be 3D printed and have an old Bitmain AntMiner S9 ASIC miner turned into a silent space heater mining BTC for less than $400 USD including buying a used S9 if you don’t have one lying around unused already. If you do have an S9 and a 3D printer that you can use to 3D print all the required parts, then the cost is significantly reduced, so you will need to buy just the extra fans and Ethernet to WiFi adapter. So, why not get to doing yourself a space heater that mines Bitcoin now instead of buying a pre-built one such as Heatbit that will cost you more than twice what you would normally spend if you buy everything and built it yourself.

And something from us to think about, you can swap the AntMiner S9 with an AntMiner L3 Scrypt ASIC and similarly have it optimized for silent operation, it will be easier since it can consume less power for optimal power efficiency with a custom firmware installed on it or you can up the heating power and get extra performance. The thing is that thanks to merged mining LTC and DOGE the L3+ ASIC miner might be able to pay for more of the electricity it uses compared to what an S9 could at the moment. Scrypt ASIC miners haven’t outperformed the L3+ and what it can do with custom firmware unlike SHA256 ASIC miners that have been faster in development and the S9, although from the same period is not as profitable nowadays. So, you might want to experiment with an AntMiner L3+ instead of an AntMiner S9 as a base ASIC miner for your new space heater, especially if you have one lying around and unused already…

– Download the S9 Space Heater Box STL files and the PDF DIY guide from Crypto Cloacks’ File Factory

Heatbit – A Nice Looking Heater That Mines Bitcoin

18, Nov 2022

It seems that somebody has finally made “the ultimate space heater” that can mine Bitcoin while keeping you warm. Enter Heatbit – a Bitmain Antminer S9 ASIC miner turned into a space heater with a great looking design, silent operation and mining Bitcoin while keeping you warm during the cold months. Do note that Heatbit is not being advertised as a Bitcoin miner that can keep you warm, it is just the opposite – a space heater that mines Bitcoin while keeping you warm. So, in essence it is a device to keep you warm when you need it, generating some Bitcoin while doing so to help you pay for the electricity it uses for instance, and not a Bitcoin miner that should always be kept on.

As for the claim that Heatbit is “The first heater that mines bitcoin” we cannot fully agree as there have been numerous such products over the years, though none of them apparently did get enough popularity. It is for sure not going to be the last one either on this market and lately we are seeing a lot of users also modifying the good old AntMiner S9 ASIC miners to be used as home heaters. Then there are also some mining companies that tried to advertise their ASIC miners as home heaters as well.

Heatbit was apparently conceived during the pandemic thanks to an Antminer S9 device being used by the company’s founder and apparently it has one of these legendary ASIC miners inside, but reworked to be silent and safe. Consuming up to 1.4 kW of power and able to deliver up to 14 TH/s of Bitcoin mining hashrate while operating at full capacity and being able to heat 170 square feet (about 16 square meters) according to the official specs. At full power the Heatbit should be able to operate with a noise level of below 42 dB, so it should be pretty silent, especially if you compare it to the very noisy stock AntMiner S9 ASIC that goes 80 dB or more when working.

Specifications of the Heatbit:
– Hashing power: Up to 14 TH/s
– Power Usage: 1.4 kW,
– Power: Warms up to 170 square feet, quietly
– Noise: <42 dBA - Size: 870x319x259 mm / 34,3x12,6x10,2 in - Weight: 31 lbs / 14 kg

The Heatbit is available in three different models, While and Orange for $1149 USD and a Wooden one available for $1199 USD and the device should be shipping already. You need to connect the device to a WiFi network and power in order for it to function and you can use the provided App to control and monitor how the space heater operates as well as to manage what Bitcoin it has mined so far while working. It all seems to be designed so that it can be really easy for the user as should be for a consumer product designed for more general users and not a miner targeted at more advanced users. If you are a traditional crypto miner you will most likely pass on that one as it comes quite expensive for what a S9 delivers in terms of performance and profitability though.

The App is available for both iOS and Android devices and it allows you to configure and control one or more Heatbit devices in your home or office or wherever you place them. It gives you an easy overview of how the heater is currently performing in terms of hashrate and you get to control the heat output you need between three settings – 50%, 75% and 100%. Do note that using lower heating percentage will also result in lower hashrate for the mining. The App also has a built-in wallet that allows you to manage the Bitcoin you have mined so far. There is a simple Demo mode available, so that you can check out the features of the App by downloading it even without having a Hotbit device like we did.

What we are kind of missing and would like to see as a feature is the ability to monitor the ambient heat in the location where you have the miner and a user controllable setting for a desired temperature to be kept in that room. A scheduler for when to automatically turn on and off the heater would also be quite nice to have. That is as far as heating goes, and having more stats on the Bitcoin mining part would also be nice. Things like how much it has mined so far in today, this week, this month and total etc. We know that the Hotbit is a heater first and Bitcoin miner then, and that its main goal is not to have it running at maximum level 24/7 like you would normally do with a miner, but still more stats is always nice.

– Check out the official Heatbit website for more details…


top