Crypto Mining Blog
It Is All About BTC, LTC, ETH, DOGE, KAS mining as well as other alternative crypto currencies
Search
Posts Tagged ‘Kaspa FPGA miner’
The Osprey Electronics E300 14 GH/s kHeavyHash miner might have been the first FPGA miner on the market for KASPA, but it apparently won’t be the only one with more FPGA and ASIC miners for KAS incoming. The E300 was initially priced at $4999 USD and is currently available at $5199 USD with end of May delivery with 400-500 Watts of power usage, but it seems that the device is now facing competition with the MultMiner M2 FPGA miner (apparently a rebranded Blackminer FPGA from HashAltCoin with kHeavyHash support) offering a hashrate of 8 GH/s at 1 kW or 10.5 GH/s at 1.3 kW as well as DigyByte, Tellor, Qitmeer and Kadena support with a price of $2000+ USD. The other new option is apparently called SuperScalar K10 kHeavyHash ASIC miner that promises 30 GH/s hashrate at 1700W of power usage with a price of around $8500-$10000 USD.
All of these FPGA and ASIC miners for KASPA (KAS) are quite expensive and although they do outperform the GPUs that most of us use for mining KAS at the moment, they still might not be a good investment and the reason for that is pretty simple – KASPA (KAS) is the only coin that currently uses the kHeavyHash algorithm and its block reward is decreasing steadily each month (check the emission curve for details) and constantly rising hashrate and difficulty. So, going for a very expensive kHeavyHash ASIC miner that cannot mine anything else is very risky and can easily get you to lose money, it is much wiser to invest what you would pay for the hardware to buy KAS instead, that could turn out to be a much better investment. The situation with FPGAs is a bit better as they could in theory be reprogrammed to mine other algorithms and coins, but there is no guaranteed that they will be, so still quite risky and again might be a better choice to go for directly investing in KAS than to buy FPGA or ASIC miner to mine it with it.
Now, if you happen to have an old Blackminer F1, F1mini, F1+, F1mini+, F1-Ultra or an F2 purchased back in the day from HashAltCoin, then you might want to pay attention here as these got a firmware update to support KASPA (KAS), although the bitstream to support the kHeavyHash algorithm is strangely called “Kasper Bit”. Head on to HashAltCoin’s support section to download the new firmware updates for these devices that will bring you KAS support and depending on the hardware you have you might be lucky to get a “free” MultMiner M2 capabilities. Surely it will be a good enough reason to revive these miners from the dead even if it is just a small mini that is not that much powerful it could still mine you some Kaspa coins at profit due to the great power efficiency of these FPGAs.
Do note however that you might need to use proxy or a VPN if you are based on USA (maybe some other countries as well) in order to access HashAltcoin’s official website and be able to download the firmware updates for the Blackminer!!!
– To the HashAltcoin Support Center with KAS bitstream updates for Blackminer FPGA miners…
- Published in: Mining Hardware
- Related tags: Blackminer, Blackminer KAS support, Blackminer KASPA support, Blackminer kHeavyHash, Hashaltcoin, HashAltcoin kHeavyHash, HashAltcoin kHeavyHash firmware, HashAltcoin kHeavyHash update, KAS, KAS ASIC, KAS ASIC miner, KAS FPGA, KAS FPGA miner, Kaspa, KASPA ASIC, KASPA ASIC miner, Kaspa FPGA, Kaspa FPGA miner, kHeavyHash ASIC, kHeavyHash ASIC miner, kHeavyHash bitstream, kHeavyHash FPGA, kHeavyHash FPGA miner, MultMiner M2, Osprey Electronics E300, SuperScalar K10
It seems that the first FPGA miner (not an ASIC) for mining KASPA (KAS) and its kHeavyHash algorithm might be out now – the Osprey Electronics E300. The device is apparently capable of 14 GH/s hashrate on the kHeavyHash algorithm with power usage of 250-500 Watts depending on settings with future support for ERG and RXD claimed. According to the manufacturer of these devices the E300 is based on Xilinx UltraScale+ VU35P FPGA technology and each miner comes with 3 Hash Boards + 1 Control Board, with each hash board having one Xilinx VU35P (872K LUT, 224Mb on-chip RAM, 8GB HBM2, 420 GB/s Bandwidth) and the control board is based on Xilinx Zynq 7010. The price of the miner on the official website is $4999 USD and it is currently listed as out of stock.
Do note that we have not seen or tried the E300 KASPA FPGA miner ourselves, so we cannot confirm its actual existence and there is very little information about it online. The photos on the Osprey Electronics website of the device do seem to be from an actual AntMiner S9 with the company’s logo on it. There are some screenshots from the miner’s interface that show it mining KAS on woolypooly.com from early November as well as an official video showing the miner interface. The same company apparently also makes a Helium (HNT) hotspot miner as well called Osprey hotspot G1 that has slightly more online presence. The official Discord channel does have some more information and things going on around the development of the device, so you might want to check it out if interested and want to ask some more questions. The great thing about FPGAs is that they can be reprogrammed to mine other algorithms or dor other things, unlike ASIC miners that are designed specifically for one task.
- Published in: Mining Hardware
- Related tags: E300, ERG FPGA, ERG FPGA miner, Ergo FPGA, Ergo FPGA miner, FPGA miner, KAS FPGA, KAS FPGA miner, Kaspa FPGA, Kaspa FPGA miner, Osprey Electronics, Osprey Electronics E300, Osprey Electronics E300 FPGA, Osprey Electronics E300 FPGA miner, Osprey Electronics E300 miner, Radiant FPGA, Radiant FPGA miner, RXD FPGA, RXD FPGA miner