Posts Tagged ‘Nervos’

TT-Miner 5.0.0 Nvidia GPU Miner Removes the Development Fee

6, May 2020

The latest TT-Miner 5.0.0 comes with no development fee, officially, meaning that the software will no longer mine 1% of the time for the developer like it was doing up until this version. While support and bugfixes should still continue further miner development could be stopped apparently. The latest major release TT-Miner 4.0.0 has added support for KAWPOW mining and now with version 5.0.0 this becomes the second KAWPOW miner with no dev fee, just like the official kawpowminer and this is a bit of an advantage that you might want to consider over other KAWPOW miners that do have 1% or even 2% dev fee!

If you like TT-Miner you are of course welcome to donate some coins to the developer should you wish to support further miner development, official developer donation addresses listed below:

BTC: bc1q0jvewuzg860dj7f9a6988l4ml5dc9ddzlq9e9m
XZC: aP7pMvUSgvSqswGcNxf4bBBMJbwpUEEto4
ETH: 0xb1C3d505DD3e6C737939AC686649fD79350D6D0d
RVN: RDXzfnKVBKF9uLWTCC5ao7CzWSYmh62NHN

Do note that if you get a missing DLL error when trying to run the miner on Windows you may need to download the latest Microsoft Visual C++ Redistributable for Visual Studio 2015, 2017 and 2019.

TT-Miner supports ProgPOW, KAWPOW, Ethash, UBQhash, MTP, Lyra2REv3, Epic, EagleSong and Kadena (Blake2S) algorithms on Nvidia GPUs and is available for Windows and Linux as pre-compiled binaries, a closed source miner with no developer fee for all of the supported algorithms since version 5.0.0.

– For more information and to download and try the latest TT-Miner 5.0.0 for Linux/Windows…

New NBMiner 30.0 With Memory Timings Optimization for Nvidia GPUs

30, Apr 2020

The latest NBMiner 30.0 update comes with a built-in replacement for the OhGodAnETHlargementPill memory timings optimization tool for Nvidia GPU owners of GTX 1080 and GTX 1080 Ti with GDDR5X video memory. The implementation from NBMiner does however requires the use of a custom unsigned driver under Windows and admin privileges under Linux, so not as easy as just running a custom executable file to enable the tweaks. Once implemented however it could allow for greater flexibility as you have the option to use different levels of optimizations for the memory timings via command line parameters. Have in mind that not all crypto algorithms may benefit from memory timings optimization, here are the two options you need to use to enable and activate the memory tings optimizations in the latest version of NBMiner.

--mt, --memory-tweak Memory timings optimize for Nvidia GDDR5 & GDDR5X gpus. range [1-6]. Higher value equals higher hashrate. Individual value can be set via comma seperated list. Power limit may need to be tuned up to get more hashrate. Higher reject share ratio can happen if mining rig hits high temperature, set lower value of -mt can reduce reject ratio. Under windows, a custom driver need to be installed before using -mt, see description of --driver for more detail. Admin priviledge is needed to run under linux, sudo ./nbminer -mt x. OhGodAnETHlargementPill is not needed anymore if -mt is enabled when mining on 1080 & 1080ti GPUs.
--driver Windows only option, install / uninstall driver for memory tweak. Run with admin priviledge. install: nbminer.exe --driver install, uninstall: nbminer.exe --driver uninstall. Note: the installed custom driver is not signed by microsoft, users need to disable secure boot in BIOS settings to get the driver work.

We remind you that the NBMiner is a closed source GPU miner for Nvidia CUDA and now AMD as well that is available for both Windows and Linux operating systems and it has the following developer fee built-in: tensority_ethash 3%, tensority(Pascal) 2%, tensority(Turing) 3%, ethash 0.65%, cuckaroo & cuckatoo & cuckaroo_swap 2%, progpow_sero 2%, sipc 2%, bfc 3%, hns 2%, hns_ethash 3%, trb 2%, trb_ethash 3%, kawpow 2%.

– To download and try the latest NBMiner 30.0 Nvidia and AMD GPU Miner for Windows/Linux…

TT-Miner 4.0.0 Nvidia GPU Miner With KAWPOW Support And More

20, Apr 2020

The latest TT-Miner 4.0.0 comes with added support for the new algorithm to be used by Ravencoin starting May 6th – KAWPOW, a variation of ProgPoW, as well as the ProgPoW to be used by used by the Veil project for GPU mining with both available for trying out on testnet. The latest TT-Miner also brings support for Tecra (MTP), EtherCore (ERE) and Hanacoin (HANA), so a more significant major release. In order to avoid possible problems with running the miner make sure that instead of overwriting existing older version you are extracting the latest miner to a new folder.

Do note that if you get a missing DLL error when trying to run the miner on Windows you may need to download the latest Microsoft Visual C++ Redistributable for Visual Studio 2015, 2017 and 2019.

TT-Miner supports ProgPOW, Ethash, UBQhash, MTP, Lyra2REv3, Epic, EagleSong and Kadena (Blake2S) algorithms on Nvidia GPUs and is available for Windows and Linux as pre-compiled binaries, a closed source miner with 1% developer fee for all of the supported algorithms.

– For more information and to download and try the latest TT-Miner 4.0.0 for Linux/Windows…


top