Posts Tagged ‘nexapow mining’

New Rigel 1.3.5 Nvidia GPU Miner With Further Improved NEXA Performance

7, Feb 2023

The latest update of the Rigel miner version 1.3.5 once more brings it to the top spot in terms of mining performance for NEXA mining after it has briefly lost its leading position to the recent release of lolMiner 1.67 that also brought significant hashrate improvements for the nexapow mining algorithm. Besides the performance/efficiency improvements the new version also brings support for explicit locked clocks reset.

Do note however that users are reporting issues with the new release when mining on Nvidia 4xxx series of GPUs, so you might want to try the latest lolMiner 1.67 on these at least until a fix is made available. Also, you might want to try locking your video memory to 5000 MHz as this seems to be providing the optimal performance boost while saving some power, lowering the video memory to the minimum does lead to significant reduction in the hashrate. Even though the nexapow algorithm is more GPU-intensive it still requires the use of some video memory, so setting it too low for power savings is not beneficial.

Below is an example config for running the Rigel miner on Nvidia RTX 3070 for NEXA mining:

rigel.exe -a nexapow -o stratum+tcp://pool.woolypooly.com:3124 -u YOUR_NEXA_WALLET --cclock 250 --lock-cclock 1750 --lock-mclock 5000

In the example above make sure to replace YOUR_NEXA_WALLET with your walled address for NEXA. Here we are setting a GPU clock offset of 250 (you can try the 200-300 range to see what works best for you), the GPU clock is locket at 1750 and the video memory clock at 5000 MHz. Feel free to experiment with the power limit level and the GPU clock as 1750 MHz might be a bit too much for a 120 Watts TDP limit for instance.

– To download the latest Rigel 1.3.5 Nvidia GPU miner with NEXA mining support…

The Rigel Nvidia GPU Miner Has Introduced Support for NEXA Mining

24, Jan 2023

The Rigel Nvidia GPU is a newcomer on the mining software front and apparently is less than two months old since its initial release, supports just a few crypto algorithms, but looks nice with it the terminal user interface it provides. We haven’t used it up until now, but it has attracted our attention with the addition of support for the nexapow algorithm used by the NEXA project that is lately ginning quite a lot of attention among miners and crypto traders. The Nexapow mining supports comes with a 2% developer fee, but it is apparently well worth it as the miner manages to bring up the hashrate on average about 10% in our quick tests compared to the performance that the previous best performer BzMiner manages to get you at the moment. Both BzMiner and the Rigel miner do only support Nvidia GPUs for mining NEXA, if you want to mine it on AMD GPUs you need to stick the third option which is WildRig Multi that supports AMD and Nvidia GPUs for mining NEXA.

At the moment the Rigel GPU miner is available for both Windows and Linux operating systems, supports only Nvidia video cards and supports mining of etchash (ETC), ethash (ETHW), kheavyhash (Kaspa), nexapow (Nexa) and zil (Zilliqa). The miner does support dual and triple mining with a GPU and memory intensive coins from the supported algorithms and/or ZIL, but it seems that currently nexapow + zil dual mining is not working properly, so you might want to hold it and mine only NEXA until an update is released (ZIL mining is apparently broken in the 1.3.0 release, use older version if not mining NEXA). The miner also has support for command line overclocking and optimizing the performance of the GPU, and these also do seem to work quite well. If the Rigel miner is new to you just like for us, then you might want to play around with it not only for NEXA mining. Kaspa (KAS) miners might also want to take a look at the miner, especially Windows users as they can get slightly better performance with a very slightly lower developer fee compared to lolMiner and still get the same command line overclocking options to maximize performance and lower the power usage.

– To download the latest Rigel 1.3.0 Nvidia GPU miner with NEXA mining support…

WildRig Multi 0.36.4 beta Now With Faster NEXA Performance and Lower Fee

21, Jan 2023

Now that WildRig Multi is not the only GPU mining software to support NEXA mining with the recent addition of nexapow mining in the latest BzMiner (Nvidia only for now), we got a new WildRig Multi 0.36.4 beta release with improved nexapow hashrate of up to 8% for NVIDIA GPUs, slightly improved nexapow for AMD GPUs and a much lower 2% devfee for nexapow mining. Do note that BzMiner currently only supports NEXA mining with Nvidia GPUs, while WildRig Multi also works on AMD GPUs, so AMD users don’t yet have a choice of mining software to use.

With this update WildRig Multi has almost managed to catch up performance wise to what BzMiner currently offers in terms of hashrate, though even with just 2% miner fee compared to the 3% for the slightly faster BzMiner, WildRig Multi is still a bit slightly slower. Nevertheless, competition is good as miners get better performance and lower fees, making NEXA mining more attractive, especially if it keeps up the high mining profitability. So, if you are mining NEXA on AMD GPUs, do make sure to update to the latest WildRig Multi, while Nvidia users might want to compare their performance with WildRig Multi and BzMiner for mining NEXA and with BzMiner you can also try dual-mining NEXA and ZIL for additional extra profit, something that is not yet available on WildRig Multi.

Another new and interesting development regarding NEXA mining is the addition of NEXA in one of our favourite mining pools, namely WoolyPooly. Besides support for mining NEXA on WoolyPooly, the pool has announced their near future plans to reduce block confirmations, so you can enjoy faster payouts than the normal 5 days or more waiting time for the mined coins to be released to you at the moment (5000 blocks confirmation).

– To download the latest WildRig Multi 0.36.4 beta GPU NEXA miner…


top