Posts Tagged ‘rhminer’

Pascal Coin (PASC) Halving in About a Week (Block #420480)

24, Apr 2020

Pascal Coin (PASC) is not a new crypto project, it has been around for a while already and is getting very close to its second block reward halving (it is halving every 2 years, not four like Bitcoin). You can say that PASC had its prime in early 2018 and lately it seems to be loosing traction, even though the project itself has some really good advantages and features available. We also haven’t been following it actively for more than a year already, but the upcoming second halving of the block reward – initially 100 coins, currently 50 coins (20% goes for development, so 40 to miners) and going down in half to 25 PASC coins is what reminded us about the project. The next halving is going to happen in about a week from now starting at block number 420480 the block reward will become 25 PASC coins, so we have decided to check the situation with mining at the moment.

There are currently two different miners available for Pascal Coin (PASC) and the RandomHash Proof of Work algorithm that it uses – rhminer and nanominer. We have tested both miners on AMD and Intel platform and below you can find the results we got, do note that rhminer’s built-in donation is 1% while nanominer has a 5% fixed fee for RandomHash2 mining used by PASC. Do note that Pascal Coin is mineable only on CPUs, there are currently no GPU miners available for that algorithm and coin as far as we are aware.

rhminer 2.3 version 3:
AMD Ryzen 3900X (12C-24T) – 410 KH/s
Intel Core i7 6850K (6C-12T) – 163 KH/s

nanominer v1.8.2:
AMD Ryzen 3900X (12C-24T) – 363 KH/s
Intel Core i7 6850K (6C-12T) – 110 KH/s

The AMD platform has double the CPU cores, so it is not surprising that it performs faster, but it also seems that the RandomHash algorithm that Pascal Coin (PASC) uses does manage to perform a bit better on the latest generation of AMD Ryzen CPUs. Out of the two miners the nanominer is apparently not as well optimized as rhminer and the 4 percent extra dev fee it has makes the rhminer as the preferred choice for sure. Nanominer also performs worse on Intel as compared to AMD based on the performance we see in our comparison, but still rhminer is giving roughly 50 KH/s extra performance on both platforms and has significantly lower dev fee. You can trade any mined Pascal (PASC) coins on TOKOK and qTrade crypto exchanges.

RHminer RandomHash CPU and Nvidia GPU Miner for PascalCoin (PASC)

13, Mar 2019

If you are looking to mine PascalCoin (PASC) on your crypto mining hardware you need to check out the RHminer for the RandomHash algorithm. The miner is open source with official binaries available fo Linux and Windows for different CPUs as well as for more-recent Nvidia GPUs. The current implementation of rhminer for the RandomHash algorithm does manage to provide faster performance on a more recent CPU than on Nvidia GPUs, the faster the CPU and the more the cores you have – the higher performance you will get. Still there is work being done to further optimize Nvidia GPU performance (currently supported are Kepler, Maxwell, Pascal and Volta architectures with their own binaries). By default the official binaries are with 1% developer fee built-in, though you can compile from source with no dev fee if you want to have that removed.

There is another interesting alternative to maximize the performance of your GPU mining rigs if you use the Nanominer for GPU mining and at the same time for RandomHash CPU mining as the miner supports this kind of dual mining mode. Of course this solution will be better if you have a more powerful CPU and not a slow Celeron processor as this may actually hinder GPU performance in some cases if you try to dual mine… still it won’t hurt to give it a try.

– To download and try the latest rhminer 1.4 for PascalCoin (PASC) for Linux and Windows…


top