Crypto Mining Blog
It Is All About BTC, LTC, ETH, DOGE, KAS mining as well as other alternative crypto currencies
Search
Posts Tagged ‘AntMiner S2’
The Chinese company BitMain has started shipping the third batch of their AntMiner S2 SHA-256 ASIC miners with a hasrate of 1 Terahash for mining Bitcoin. The new batch of S2 miners is priced at $3199 USD (7.387 BTC), the company has started shipping the first two batches of their new Terahash Bitcoin ASIC miners at the start of this month, but the problem is that even at the current price putting the numbers inside a calculator does not give out promising results. With the current exchange rate of Bitcoin you are not going to be able to even get a return of the investment in the hardware you have made. You would need an exchange rate of about $650 USD in order to be able to break even by the end of this year and this everything going on lately things are a bit uncertain. Thus investing in Bitcoin ASIC devices may not be the best choice at this particular moment, especially if you are going to be paying with BTC for them. And with the current market situation investing in Scrypt ASIC miners does seem riskier as well, so people are already very careful in what they put their money into.
- Published in: General Info|Mining Hardware
- Related tags: 1 Terahash ASIC, AntMiner S2, AntMiner S2 Batch 3, bitcoin asic, Bitmain, Bitmain AntMiner S2, Bitmaintech
The company Bitmain Technologies has announced that the production of the successor of their 180 GHs AntMiner S1 Bitcoin ASIC (on the photo above) is underway and they are going to be shipping the 1 Terahash AntMiner S2 starting in April (next month). The Bitmain has become known for their fast shipping and very competitive prices that go down with the difficulty increase and they are yet again showing how to do business with BTC ASICs. The new S2 units are based on the company’s 55nm BM1380 chips that are used in the S1 miners, but apparently they have managed to achieve high-density chip chains and lower power usage in order to be able to squeeze 1 Terahash in a 4U case along with a 1000W PSU manufactured by Enermax.
Bitmain AntMiner S2 Specifications:
– Hash rate: more than 1,000GH/s
– Power consumption: 1,000W from the wall
– Power efficiency: 1Watt/GH/s
– PSU: 1000W produced by Enermax, 80PLUS gold
– 4U Rack
– PSU inside
– Plug and Mining
– Stable and quietly
The pre-orders for the first batch of the new Bitmain AntMiner S2 1 THS ASIC miners have been filled with a price of $3899 USD (6.34 BTC) and a shipping date of April 1st (not a joke hopefully), the second bach of devices is scheduled for April 10th shipping and the price is a bit low at $3599 USD (5.852 BTC) and there are still units available. The new S2 miners do come a bit more expensive than 5x AntMiner S1 miners overclocked to 200 GHs each to give you a total of 1000 GHS with a price of less than 5 BTC. The difference however is that the power consumption for the S2 miner is 1000W and for the same hashrate with S1 miners you would get roughly about 2100-2100W. So with S1 you get cheaper price for the hardware (you will need to also buy 5x 500W+ PSUs for the miners), but more than double the power consumption for the same hashrate, even though the same chips are used in both products. Putting more BM1380 chips running at lower voltage and frequency is what BitMain has done in order to lower the power usage and get better performance per watt without having to increase the cost of the hardware too much.
– For more information about Bitmain Technology’s current and upcoming BTC ASIC miners…
- Published in: Crypto News|Mining Hardware
- Related tags: 1 THS AntMiner S2, 180 GHS AntMiner S1, AntMiner S1, AntMiner S2, AntMiner S2 ASIC, AntMiner S2 Bitcoin, AntMiner S2 BTC ASIC, asic mining hardware, bitcoin asic mining, Bitmain, Bitmain AntMiner S2, Bitmain Technology, Bitmaintech, BM1380, Terahash ASIC