Posts Tagged ‘Blackminer F1’

Hash Altcoin BlackMiner F1+ FPGA Miner Available at Reduced Price

28, Aug 2019

Hash Altcoin is probably the only user friendly FPGA miner out there that can be used by miners that are not into FPGA mining and the company also offers not only to ship the hardware to you, but also to hast it for you at very reasonable cost ($2.4 per day fixed). The company is currently running a promotion for their top product BlackMiner F1+ that is available at a price of $2450 USD, so if you are interested in giving it a try you might want to check out the offer. The miner has a large number of supported algorithms with new ones being introduced quite often with bst, c11 and bmw512 just recently added in the list of already over 20 supported ones. There is also the option to pay $999 USD upfront and 12 monthly installments of $92 USD each for the rest of the amount (make sure you take advantage of the new user registration coupon they give you and the invite code mentioned here), available only if you want a miner hosted by Hash Altcoins. You can use our invitation code ZLOZLA when ordering a miner from HashAltcoin, should you decide to, in order to get a $100 USD coupon code for your next order (can be used for electricity costs should you decide to get your miner hosted by them).

Profitability wise at the moment the miner earns in between $6 and $10 a day after you deduct electricity costs, though there are times with higher profit as well and we rarely see it dropping below $5 USD. There is a profitability calculator available on the official website that gives you an idea what coins to mine for the best profit at the moment, though you need to do some extra research for some of the listed coins as they may be a really low market cap ones. Also note that there could be some coins using the supported algorithms that are not listed and that may offer even better profit, so you might want to dig a little deeper. If you opt out for miner hosting you should know that even though the web-based miner control panel is pretty good and easy to use still going for mining some new might be a bit challenging at first if it is not available on any of the already listed pools. There are workarounds with the help of MiningRig Rentals for example if it already has support for the specific algorithm there.

– For more details about the Hash Altcoin BlackMiner F1+ FPGA Miner…

BSHA3 is a SHA3d Community Supported Proof of Work Crypto Coin

3, May 2019

The BSHA3 project was apparently revealed last year, however it seems that the original developer of the coin has abandoned his work and a bit earlier this year it has been revived as a community supported project. BSHA3 is apparently the first crypto coin to use the SHA3d algorithm (like SHA3-256, but two iterations each time – in the spirit of Bitcoin’s SHA-256d). Other than the different algorithm the coin follows Bitcoin’s math with 50 BSHA3 coins per block, 10 minute block time and 21 million coins to be ever mined in total. The original chain relied on 2016 block difficulty adjustment as well, though that apparently caused it to get stuck at a point, so the new community fork at block 20418 with the new LWMA 3 difficulty algorithm was made available to fix the problem and restore the network.

There are already a number of mining pools available as well as few small exchanges that have listed the coin, though it seems that currently the mining is being dominated by a single Asian mining pool. There is a miner forked from ccminer for Nvidia GPUs available for the SHA3d algorithm available. Also the algorithm is already available for mining on FPGA devices as well, the HashAltcoin Blackminer F1 series do have support for SHA3d, though that does not bring that much advantage over a high-end GPU mining rig in terms of performance compared to ASICs for example. If you are looking for an exchanges to trade BSHA3 coins you can try Citex.

– For more details about the BSHA3 SHA3d community supported crypto coin…

Blackminer F1 Mini is an Upcoming Single Chip FPGA Miner

1, Apr 2019

Blackminer F1 Mini is a new single-chip FPGA miner from Hashaltcoin that supports the same large number of crypto algorithms as their larger multi-chip Blackmienr F1 and Blackminer F1+ FPGA mining devices. The new Blackminer F1 Mini FPGA miner is a great entry level device that comes with a price of $179 USD and is available for pre-order with delivery time set for May 5, 2019. The the first batch of the F1 mini is only 300 units and it comes with no power supply or heatsink in order to reduce the shipping cost, these you need to provide yourself. You need an ATX power supply (6-pin PCI-E), DC 12V 6A or 12V 8A power supply (50W typical power usage) as well as a pretty standard cooler for Intel LGA115X CPU that should be compatible with the design. We have not tested any hardware from Hashaltcoin yet, though the F1 mini does sound like a nice and affordable FPGA miner to try and experiment with before going for any of their larger products…

You can use our invitation code ZLOZLA when ordering a miner from HashAltcoin, should you decide to, in order to get a $100 USD coupon code for your next order (can be used for electricity costs should you decide to get your miner hosted). The invitation code will work for orders of other Blackminer devices as well, regardless if you choose to have the device shipped to you or to have it hosted by HashAltcoin.

Blackminer F1 Mini Supported algorithms:
– lyra2z: 5.1 MH/s
– skeincoin: 420.0 MH/s
– xvg_lyra2rev2: 18.0 MH/s
– phi1612: 26.0 MH/s
– tribus: 244.0 MH/s
– nexus: 210.0 MH/s
– 0xbtc: 1.95 GH/s
– keccakc: 2.18 GH/s
– keccakd: 2.18 GH/s
– amoveo: 4.59 Gh/s
– veriblock: 1.0 GH/s
– verus2: 22.8 MH/s
– bcd: 15.4 MH/s
– lyra2rev3: 20.0 MH/s

– For more information about the upcoming Hashaltcoin Blackminer F1 Mini FPGA miner…


top