Posts Tagged ‘Blake2s’

New SRBMiner-MULTI CPU and AMD GPU Miner 0.1.7 Beta With m7mv2 Support

18, Nov 2019

The latest SRBMiner-MULTI CPU and AMD GPU Miner version 0.1.7 brings support for the m7mv2 algorithm (CPU only) used by Magi Coin (XMG) along with some improvements such as better CPU auto configuration compared to earlier releases that had some issues using optimally all cores. We haven’t been following XMGM for quite some time now, but it is good that the project still continues and is developing, including forking to new algorithms such as the m7mv2. With the previous release SRBMiner-MULTI 0.1.6 the miner became a viable alternative to XMRig regarding RandomX support, so this is probably going to be generating a lot of interest as we get closer to the end of the month and the XMR fork to this new algorithm.

SRBMiner-MULTI CPU & AMD GPU Miner 0.1.7 beta changelog:
– Added ‘m7mv2’ algorithm (Magi coin – XMG)
– Cpu auto configuration should be better than on previous versions
– Added CPU data to API, also rearranged a few things in API
– Console window ‘Quick Edit’ mode disabled on miner start, so users won’t accidentally pause miner by clicking in the console window

– To download and try the new SRBMiner-MULTI CPU and AMD GPU Miner 0.1.7 Beta…

New SRBMiner-MULTI CPU and AMD GPU Miner 0.1.6 Beta With Improved Performance

12, Nov 2019

The latest SRBMiner-MULTI CPU and AMD GPU Miner version 0.1.6 brings some improvement in CPU mining performance thanks to better utilization of processor threads, though it seems that further optimizations might be needed. In a quick test with RandomX-based algorithms we are seeing an improvement in hashrate compared to the previous SRBMiner-MULTI 0.1.5 that has introduced RandomX support, but full thread utilization may still not at 100% for all processors and performance is a bit lower when compared with XMRig on the same mining hardware, still it is good to see that efforts are being made for further improvements.

SRBMiner-MULTI CPU & AMD GPU Miner 0.1.6 beta changelog:
– Fixed threads binding on systems with more than 1 numa node
– Better auto configuration for cpu mining
– Previous two fixes should bring higher hashrates
– Added pool controlled algorithm switching capability (Monero Ocean)
– Added pool config parameter “algo_min_time” and --algo-min-time to cli (Monero Ocean)
– Added pool config parameter “keepalive” and --keepalive to cli

Update: There has been an update that fixes issues for SRBMiner-MULTI 0.1.6 that corrects the less than 100% load on all cores/threads of the processor, so now the performance is even better and should be pretty much the same as what XMRig currently offers on the same mining hardware as far as RandomX and its variants are concerned, so just redownload version 0.1.6 if you downloaded the initial release.

– To download and try the new SRBMiner-MULTI CPU and AMD GPU Miner 0.1.6 Beta…

Have You Updated to Claymore Dual Miner 15.0 for Ethash Mining

10, Nov 2019

The latest version of Claymore’s Dual Ethereum AMD+NVIDIA GPU Miner v15.0 has been released a while ago, but there seem to be quite a lot of people mining Ethash-based coins using older versions of the miner on their GPUs. If you are one of these people that update their GPU mining rigs less often and do not touch them while they are working just fine without always updating to the latest mining software, you should plan to upgrade to the latest version 15 of the miner. The reason for that is quite simple, Ethereum (ETH) is reaching DAG Epoch 299 very soon (currently at 296) and older versions of the miner will simply stop working as prior version 15 of the Claymore Dual Miner DAG Epoch support is until 299. Some of you might have actually experienced issues with that if trying to mine Ethereum Classic (ETC) as it is a bit ahead of ETH in terms of DAG Epochs and already past the 299 mark (currently at 305), so for ETC version 15 is a must. This problem is specific for the Claymore miner as there are other Ethash miners that do not have the limitation out there, but this is still the most popular GPU miner for Ethash, so make sure you re up to date to avoid any possible downtime when ETH reaches Epoch 299. Other forks of Ethereum are way behind on their DAG Epochs, so they do not have a possible problem with older versions for now, though you should still update just to be on the safe side. It is especially important to be up to date with version 15 if you are using services such as NiceHash where you might be mining a lot of different coins with your Ethash hashrate, including ETC.

– For more information and to download the latest Claymore Dual ETH miner 15.0 (Windows/Linux)…


top