Posts Tagged ‘DNX’

New SRBMiner-Multi 2.3.7 With Dynex (DNX) and Zilliqa (ZIL) Dual-Mining on Nvidia

4, Oct 2023

Up until recently the OneZeroMiner was the preffered miner for Nvidia GPU miners mining Dynex (DNX) as the fastest performing miner, however the SRBMiner-Multi software used mostly by AMD miners has recently brought back Dynexsolve support for Nvidia in the version 2.3.6 (performance was slower than OneZeroMiner) and in the just released update to version 2.3.7 things got more interesting. The latest SRBMiner-Multi 2.3.7 (2.5% dev fee DNX, 0% on ZIL) is now faster on Nvidia compared to OneZeroMiner (3% dev fee) and also has lower developer fee and even supports dual mining of Dynex and Zilliqa, so a bit of an extra advantage apart from the higher performance and lower fee. Windows miners would also like the fact that with SRBMiner-Multi they can also take advantage of the GPU clock offset actually working to further lower the power usage as opposed to OneZeroMiner’s one not working under Windows. This means that you can further reduce power usage with SRBMiner-Multi 2.3.7 while also getting higher hashrate and some extra profit from mining ZIL every hour or so for a bit.

So, if you are looking for something that you can GPU mine with profit currently and hold and mine long term then you should definitely take a look at DNX and give it a go. And another tip, get a local Dynex wallet to mine at as most mining pools supporting DNX mining won’t allow you to mine on an exchange address, and it is better to keep the mine coins in a wallet than on an exchange anyway. ZIL dual-mining might be a bit of a challenge with some of the pools not allowing you to dual-mine if both coins are not on their list of supported pools coins (K1Pool with the largest ZIL hashrate at the moment for example) and you might have some trouble using some other pools as well, though Crazypool seems to be working just fine for dual mining DNX and ZIL in our experience, so you might want to give it a go.

Example of SRBMiner-Multi command line for DNX + ZIL mining:
SRBMiner-MULTI --disable-cpu --algorithm dynex --pool eu.dnx.mineradnow.space:18000 --mallob-endpoint https://gomallob.mineradnow.space/ml --wallet DNX_WALLET --password WORKER_ID --zil-enable --zil-pool eu.crazypool.org:5005 --zil-wallet ZIL_WALLET.WORKER_ID --zil-esm 2 --gpu-cclock0 1485 --gpu-mclock0 5001 --gpu-coffset0 200 --zil-cclock 1000 --zil-moffset 1000

Make sure to change DNX_WALLET and ZIL_WALLET to your own wallet addresses and WORKER_ID to your mining rig’s id. For DNX a GPU clock of around 1485 is a good choice and memory at 5001, ZIL core clock of around 1000 (for 3000 series Nvidia) and +1000 on video memory is a good option for ZIL mining. Depending on your GPU an offset of 200-300 should be the sweet spot, so you might want to start from 200 and increase it to around 300 to see what works for you – the higher the value the lower the power usage, but GPUs might become unstable.

– To download the latest SRBMiner-Multi 2.3.7 With Support for DNX and ZIL Dual-Mining…

Kaspa (KAS) Has Tied with Ethereum Classic (ETC) Among HiveOS Miners

15, Mar 2023

Checking out the Hive OS Linux Mining OS statistics about what coins and algorithms are the most mined among the users of that mining operating system today gives quite interesting results. Kaspa (KAS) has tied with Ethereum Classic (ETC) with each at 19% of the coins being mined, followed by Ravencoin (RVN) in third place with 9%, NEXA at 7% and ERGO (ERG) at 5%. KAS has been slowly catching up to ETC in the statistics since the beginning of the year, but now it is about to flip it and become the most mineable coin among HiveOS users (it is still actually less than half percent behind). Of course, HiveOS is not the only Linux-based mining operating system and there are users that are mining directly, still this is one of the largest in terms of users and gives a good overview and insight thanks to the statistics that it provides.

It is interesting to note that in the chart with the algorithms Kaspa (KAS) and its kHeavyHash mining algorithm are apparently at 21% already with Etchash used by Ethereum Classic (ETC) at 20% of the total. There is a slight difference in the percentage here as there are some coins that use the same algorithm for mining and looking at the ore detailed stats with less rounding, we can see that Nicehash-kHeavyHash constitutes at around 1.5% additionally, though listed as a separate entity in the coins section and the Nicehash-EtcHash is at just 0.66%. Among the new coins that are slowly going up, apart from NEXA that is already quite high up at 7.29%, we can also see Dynex (DNX) at 1.43% and Radiant (RXD) at 0.8%.

– Take a look at the full Hive OS network statistics for more insights…

SRBMiner-MULTI v2.2.0 Released with Dynex Mining Support for AMD, Nvidia and Intel GPUs

8, Mar 2023

The latest update version 2.2.0 of the SRBMiner-MULTI miner comes with support for mining Dynex (DNX) that covers the not only already available Nvidia GPUs (via the official DynexSolve miner), but also adds support for DNX mining on AMD and Nvidia GPUs. The mining fee for mining Dynex with the SRBMiner-MULTI v2.2.0 is currently set at 3%. Earlier this year SRBMiner-MULTI added support for Nvidia GPUs in its major release 2 and since then the miner has introduced and gradually improved support for Intel’s ARC GPUs as well. SRBMiner-MULTI v2.2.0 is the first mining software to offer AMD and Intel ARC miners the ability to mine DNX, though mining DNX is still having issues with pools, so do not be discouraged if you have trouble connecting to a mining pool. This should hopefully soon be resolved as we also do have some trouble properly testing the new release at the moment.

A nice addition to the features for DNX miners from SRBMiner-MULTI is the ability to use multiple mining pools and mallobs, that can help you if you are having pool connectivity issues. There is currently no “adj” option available to set manually the number of Dynex chips to be simulated like on the official DynexSolve miner, but you can use the “--gpu-intensity” parameter for that. Another useful feature is the ability to dual-mine Dynex (DNX) and Zilliqa (ZIL) with SRBMiner-MULTI, so that can help in getting some nice extra profit as opposed to just single mining Dynex. Nvidia users might also try and compare the performance of the official DynexSolve 2.2.5 miner (no dev fee here) to what SRBMiner-MULTI v2.2.0 miner offers on their hardware (3% dev fee), feel free to share your results in the comments below if you do so.

– To download and try the latest SRBMiner-MULTI GPU miner now with Dynex support…


top