filmes porno buceta gostosa phim sex www xxnxx com xxxvideos porno Xvideos Com

CryptoDredge 0.15.0 Nvidia Miner With Added MTP Algorithm Support

27 Dec
2018

The latest CryptoDredge Nvidia GPU miner version 0.15.0 comes with fixes for Lyra2REv3 performance, but more importantly it also adds support for the new MTP algorithm currently being used by the Zcoin (XZC) project. It is recommended to immediately upgrade to the new 0.15.0 if you are mining Zcoin (XZC) at the moment with the djm34 ccminer fork as you should be getting more than double the performance with CryptoDredge on GTX 1×00 series and more than half on RTX 2×00 series, so again worth mining even with the recent hashrate increase we are seeing. Another important thing regarding MTP support is that you need to use Nvidia graphics card with at least 5 GB video memory, however there are no special requirements for CPU and RAM, so 4 GB System RAM must be sufficient (older miners had larger memory requirements!). Also note that compared to other algorithms MTP transfers a larger amount of data to the pool, so this may be a problem for limited and slow internet connection speeds. Have in mind that after the performance optimizations in CryptoDredge for MTP the power consumption has also increased over the low usage that ccminer has been having for this algorithm previously.

Do note that the CryptoDredge miner supports only Nvidia GPUs and is a closed source software that comes with 1% built-in developer fee for all supported algorithms, however the dev fee is 2% currently only for MTP mining, there are binaries available for both Windows and Linux (CUDA 9.1/9.2/10.0).

– To download and try the latest release of the CryptoDredge 0.15.0 Nvidia GPU miner…

Mining Zcoin (XZC) with the New MTP Algorithm on AMD and Nvidia

22 Dec
2018

Zcoin (XZC) has recently switched to a new algorithm called MTP as a means to be ASIC-resistant, it is a new algorithm and mining software is still being developed, but there are already miners available for CPUs (not that useful anymore) and GPUs – for both AMD and Nvidia. If you are interested in trying out to mine Zcoin you should be aware that the algorithm needs more memory, both on the GPU (4 GB VRAM on the video cards as minimum) as well as on the mining rig where 8 GB plus is a must have preferably 16GB for 6-8 GPUs. Also you should note that miners are still being optimized, so performance and stability can be further improved and you can expect to have some issues at this point. if you want to try out the CPU miner for MTP you should be aware that it also needs a fixed 4 GB per thread so with an 8-core processor, you would need 32 GB of RAM.

If you are using Nvidia GPUs for mining you should head over to the ccminer fork with MTP support being actively developed by djm34 and download the latest version. Depending on your settings the current version should be capable of providing about 1200 KHS per GTX 1080 Ti GPU with lower power usage (not yet fully optimized), owners of RTX 2080 GPUs might be quite happy with up to almost double that hashrate, but with higher power usage though. Make sure that you have the latest Nvidia video drivers installed though with CUDA 10 support in order to be able to run the miner.

If you want to try mining ith AMD GPUs, then you will need the latest WildRig Multi 0.15.0.6 mtp beta miner that adds beta support for the MTP algorithm. AMD RX 480, RX 580 and RX 590 GPUs should be capable of delivering about 800-900 KHS per card which is quite good compared to the current Nvidia results, however the power consumption is higher on the AMD video cards as well. The AMD GPU miner for MTP also has high requirements for both video memory and system memory, so make sure you have enough available on your mining rigs. If you have just 4 GB of system memory availabe you can still experiment with the miners to see what performance you can get, but you should limit the miner to run on a single GPU only. Some good places to trade the coin include Binance, Bittrex, Crex and Livecoin.

– If you are interested in learning more about the Zcoin (XZC) privacy centered crypto project…

New T-Rex 0.8.9 Nvidia Miner With GlobalToken Support and Performance Improvements

21 Dec
2018

The T-Rex Nvidia GPU miner has been updated to version 0.8.9 bringing a number of improvements in terms of performance as well as support for some new algorithms since the last time we covered the miner. The newly added algorithms in the recent updates include astralhash, jeonghash, padihash, pawelhash that are being used used by GlobalToken. The performance improvements are focuses on X22i and the X16 family of algorithms in general (x16r, bcd, x17, x22i etc.) as well as skunkhash. Do note that the T-Rex is a closed source miner with 1% development fee built-in. Also make sure you have a recent video driver installed (the latest for CUDA 10 support) as the binaries for both Linux and Windows are compiled for CUDA 9.1/9.2/10.0.

– For more information and to download and try the latest version of the T-Rex miner…

top