Posts Tagged ‘Falcon Scrypt ASIC’

What is the Power Consumption of the 27 MHS GAWMiners Falcon Scrypt ASIC

13, Jun 2014

gawminers-falcon-power-consumption

We have been using and testing the 27 MHS GAWMiners Falcon Scrypt ASIC miner for a few days already and we did measure the power requirements of the device and are ready to do some recommendations for a suitable PSU to use. On the GAW website the power consumption of the miner is stated as 1040W and since this is essentially a ZeusMiner THUNDER X3 inside, we have also checked the specifications announced on the Zeus website – 920W. Zeus however does recommend a 1200W modular 80PLUS Gold or Platinum rated power supply to be used for this miner, though you can actually do well with a slightly less powerful model if it is a good one.

As you can see from our measurement on the image above, where we are using a Corsair 1200W 80Plus Platinum power supply, the actual power usage of the miner is 916W, so very close to what Zeus has stated on their website. The fact that we are using a more powerful 80Plus Platinum power supply gives us very high efficiency of over 94% at this serious load, so the total power consumed at the wall is roughly 970-975W. This means that even with a good quality 80Plus rated 1000W power supply you should be fine. No need to go for 1200W as recommended, though the higher power model will most likely help you minimize the power wasted as it will be operating at better efficiency when not pushed to the limit. We did a test with a 1000W power supply that was barely managing to work at 78-80% level of efficiency and got a power usage of almost 1100W at the power socket. So if you want to save yourself some heat and waste less power, you better go for at least 1000W power supply that is rated 80Plus Gold.

We Just Got a 27 MHS GAWMiners Falcon Scrypt ASIC Miner

9, Jun 2014

gawminers-falcon-scrypt-asic-miner

Today we got a 27 MHS GAWMiners Falcon Scrypt ASIC Miner based on the 55 nm Zeus Scrypt ASIC chips and we have just finished setting up the device and started testing it. Our initial impressions are quite good so far and once we play a bit more with the device we are going to share all of them with you, so expect a lot more details in the next few days as we continue to test the Scrypt ASIC miner. Aside from the 27 MHS Falcon, GAWMiners also has both a faster model – the 54 MHS War Machine, as well as slower and more affordable models such as the 13 MHS Black Widow and the smallest 1.3 MHS Fury. In fact the Fury is currently probably the most affordable small Scrypt ASIC miner in production, along with the Zeus Blizzard, now that Gridseed has stopped producing their 5-chip GC3355-based miners.

We do need smaller and affordable Scrypt ASIC miners in order for them to be accessible to normal miners that want to mine DOGE for example with no resources to buy a 10K USD Scrypt ASIC miner like the big mining farms can. While the initial price of the 1 MHS+ Scrypt ASICs was not the best at about $200 USD, their latest price is much more reasonable and affordable at $139.95 USD and can get even better if you buy multiple units. This should allow the Scrypt hashing power to remain distributed among many people and not get centralized in the hands of just few big mining farms, otherwise there is a high risk of more and more people going away from Scrypt crypto currencies and moving to other alternatives.

Now back to testing the Falcon. Meanwhile, if you have some questions about the miner we are already prepared to answer them.

– To see what other Zeus-based Scrypt ASIC miners are currently offered by GAWMiners…


top