filmes porno buceta gostosa phim sex www xxnxx com xxxvideos porno Xvideos Com

Posts Tagged ‘KAS exchange

Dual-mining or mining two different crypto currencies at the same time is a good way to optimize the performance and profitability of your GPU mining hardware, especially at times like now when the profitability from mining is low. Zilliqa or ZIL has added a new level of the traditional dual mining where you normally mine a GPU coin and a Memory coin on the same GPU, because it is mined for just a minute every two hours. This way you can dual-mine ETC + ZIL without losing almost any of your hashpower for the second coin, but also you can add a third coin in the mix, a GPU-heavy coin and thus try to even further improve your profitability. Dual-mining is also possible on some ASIC miners as well such as the iPollo series of ETC/ETH miners where you can mine an Ethash or ETChash crypto coin together with ZIL, thus getting an extra 30% higher profit compared to just normal mining.

Kaspa or KAS is an interesting and still highly unnoticed project that is just recently starting to gain attention not only form miners, but from investors as well. A couple of days ago we have discussed how you can start mining Kaspa (KAS) and since then the coin has pretty much doubled in trading price and was going up in a market conditions where most other crypto coins were going down. So, if you still haven’t checked out Kaspa (KAS) and its very fast block times and transfer on-chain, then you should do so as it will become even faster in the near future. Also, do not miss your chance to mine some coins now as well and make some really nice profit in the future!

We are not going to focus on KAS now, here we are going to be talking about Dual-Mining ETC and KAS as well as Tripple-Mining ETC + KAS + ZIL. Etereum Classic (ETC) uses the memory heavy Etchash algorithm while Kaspa (KAS) relies on the kHeavyHash algorithm for mining which is a GPU heavy one, so they are a great combo together for dual-mining and adding Zilliqa (ZIL) on top of these two makes a great mining threesome for optimal performance and profit. You can of course use not only ETC, but other Ethash or ETChash crypto to pair up with KAS and ZIL for triple mining, so the choice is up to you. To answer your question before you ask, yes, we are currently mining ETC + KAS + ZIL on our Nvidia mining GPUs.

We are going to focus on using lolMiner for dual-mining and triple mining here (latest version 1.62), although other miners such as Gminer and Bzminer for instance also support dual and/or triple mining and the procedure there is similar, although the command line to run the miner might be different. Currently we like the stability and performance of lolMiner the best as far as Kaspa mining is concerned, but feel free to use a different miner if you prefer it over lolMiner. The examples below use the mining pool for Dual mining ETC + ZIL and the WoolyPooly pool for mining KAS, other mining pools should work, but may require a bit of a different configuration settings. Do not forget to replace ETC_WALLET, ZIL_WALLET, KASPA_WALLET and WORKER with your own wallets for the respecitve crypto currency as well as the name or number of your machine as worker.

ETC + KAS Dual Mining:
lolMiner.exe --algo ETCHASH --pool --user ETC_WALLET.WORKER --dualmode KASPADUAL --dualpool --dualuser KASPA_WALLET.WORKER

ETC + KAS + ZIL Triple Mining:
lolMiner.exe --algo ETCHASH --pool --user ETC_WALLET.ZIL_WALLET.WORKER --enablezilcache --dualmode KASPADUAL --dualpool --dualuser KASPA_WALLET.WORKER

Now, although we are showing you dual and triple mining configurations, it is really pointless not to take advantage of the triple mining option as it will only benefit you even more as ZIL mining hardly affects the mining performance of the two other coins and the extra profit it will bring you is definitely worth it!

So, with the above settings the miner will try to maximize the ETC mining hashrate and fill in the available GPU resources with some KAS calculations, thus you will be getting pretty much the same hashrate for ETC and about 1/4 to 1/5 of the usual KAS hashrate compared to KAS only mining. On a rig with 6x RTX 3080 GPUs that do 570 MH/s ETC only or 5500 MH/s KAS only we are getting around 565 MH/s ETC and around 1400 MH/s KAS hashrate in triple mining plus an extra up to 30% profit from the mined ZIL in triple mining mode (without the ZIL in dual mining only). On different GPUs your results may vary of course, especially on slower video cards, but the extra hashrate and profit should still be worth it.

In terms of the mining settings, you need to just return the GPU clock to its default value if you were downclocking it for ETC/ETH mining previously, the memory clock and the power limit levels should remain the same as for ETC/ETH mining. You could of course increase the power limit in order to get some extra hashrate for KAS, but that will also lead to increased power usage as well. The idea is to keep the ETC/ETH mining settings including the power limit, so that you would actually get more mined with the same power usage as if you were just ETC mining for instance.

Kaspa (KAS) is a very interesting crypto project that has been mostly flying well under the radar, but it is starting to get the interest it deservers lately. KAS is a proof-of-work cryptocurrency which implements the GHOSTDAG protocol – a protocol that does not orphan blocks created in parallel, but rather allows them to coexist and orders them in consensus. This generalization of Nakamoto consensus allows for secure operation while maintaining very high block rates (currently one block per second, aiming for 32/sec, with visions of 100/sec) and minuscule confirmation times dominated by internet latency.

Kaspa (KAS) being a PoW coin can be mined and mining is based on kHeavyHash, a modified form of the “optical-miner” ready HeavyHash algorithm. kHeavyhash utilizes matrix multiplication that is framed into 2 keccacs. kHeavyHash is energy efficient, core dominant (requires higher GPU clock and not affected as much by memory) and can be successfully mined by GPU with FPGAs and future specialized mining equipment also possible in the future. The blockDAG architecture of Kaspa with rapid block rates allow more mining decentralization and enables effective solo-mining even at lower hashrates. KAS was launched in November of 2021 with no pre-mine, zero pre-sales, and no coin allocations. The total supply of Kaspa is 28.7 Billion coins with an emission schedule that halves once per year via smooth monthly reductions by a factor of (1/2)^(1/12). The current block reward is 329.63 KAS and the circulating supply is almost half of the total supply with a total market cap of around 50 million USD.

Kaspa (KAS) can be mined on a number of mining pools with the largest one being WoolyPooly, though you might want to check out some of the smaller ones in order to distribute hashrate such as ACC Pool and HashPool. It can be mined on both AMD and Nvidia GPUs with a number of popular miners supporting the kHeavyHash algorithm that the coin uses such as LolMiner, GMiner, BZminer, SRBminer, Team Red Miner and KaspaMiner.

Our preferred GPU miners for Nvidia GPUs are LolMiner and GMiner, and you might want to make sure you are with more up do date video drivers for maximum performance. Also, you might want to lower the memory clock and increase the GPU clock as this is a GPU intensive algorithm and higher clocks for the GPU and increased power limits will get you much more performance boost than overclocking the memory. This also means that the power usage of GPU mining rigs optimized for Kaspa mining will be higher than what you used for Ethash/ETChash mining, though you can remain at the same lower power levels with a bit reduced hashrate of course.

A few crypto exchanges are already supporting KAS trading, these include TxBit, ExBitron, MexC and TradeOgre. There has been a spike of interest and a bit of a price hike in the last few days, so mining profitability is also up with Kaspa getting in the list of the most profitable coins to be mined at the moment.

For more details you can visit the official Kaspa (KAS) project website…