filmes porno buceta gostosa phim sex www xxnxx com xxxvideos porno Xvideos Com

Search Results

BitMain Apparently Releasing 8x GPU AMD and Nvidia Miners in China

13, Sep 2017

It seems that BitMain is willing to extend its presence from just the ASIC mining market as the company is apparently releasing two new devices for miners that are essentially dedicated GPU miners. For now the devices dubbed G1 with 8x GeForce GTX 1060 GPUs and G2 with 8x Radeon RX570 GPUs are only listed on the Chinese website of the company with prices only in CNY. This means that they are most likely targeted initially for the Chinese miners market and may not be sold outside of the country. Inside the server like cases we are expecting to see mining versions of the GPUs being used as this is the way to go with such solutions intended for large scale mining operations and not for small home miners. As one would expect the devices are targeted at Ethereum (ETH) miners with hashrates listed for the Ethash mining algorithm, though you should in theory be able to mine pretty much any other cryptocoin that can be mined with GPU. The first batch of GPU miners from BitMain is apparently for 500 units of each.

BitMain G1 8x GTX 1060 GPUs:
– CPU: Inter Broadwell-u 3215 or 3205
– Memory: 4GB SO-DIMM, DDR3 / L-1600
– Hard disk: 1 x Msata 64G SSD
– Ethernet: 1 x 10M / 100M / 1000Mbps (Intel I210-AT)
– USB interface: 2 x USB 2.0
– Display interface: 1 x HDMI
– Graphics card: 8 x NVIDIA GeForce GTX1060
– Hashrate: ETH Hash Rate: 200MHash ± 10%
– Carton size: 530mm x 320mm x 160mm
– Weight: 12.5Kg (without power)
– Price: 18700 CNY or about $2863 USD

BitMain G2 8x RX 570 GPUs:
– CPU: Inter Skylake-s G3900-LGA1151, PCH-B150
– Memory: 8GB UDIMM, DDR4 -2133
– Hard disk: 1 x 2.5inch Sata 128G SSD
– Ethernet: 1 x 10M / 100M / 1000Mbps (Intel I210-AT)
– USB interface: 2 x USB 3.0
– Display interface: 1 x VGA
– Graphics card: 8 x AMD Radeon RX570, GDDR5
– Hashrate: ETH Hash Rate: 220MHash ± 10%
– Carton size: 555mm x 445mm x 132mm
– Weight: 15Kg (including power)
– Price: 19700 CNY or about $3016 USD

There is no mention of power usage and what power supplies are included in the miners or you need to take care of this on your own. Based on the description of the miners it is possible that the G1 does come without a PSU (there are external PCI-E power connectors on the chassis) while the G2 may actually have one built-in (judging from the photos), but it is not very clear. No information of the GPUs inside are mining edition cards or not, nor what is the amount of video memory of the video cards used 3/6GB for Nvidia or 4/8GB for AMD. These are all things that people interested in GPU miners would really be interested in and currently they are not being listed as details.

New SRBMiner-Multi 2.3.7 With Dynex (DNX) and Zilliqa (ZIL) Dual-Mining on Nvidia

4, Oct 2023

Up until recently the OneZeroMiner was the preffered miner for Nvidia GPU miners mining Dynex (DNX) as the fastest performing miner, however the SRBMiner-Multi software used mostly by AMD miners has recently brought back Dynexsolve support for Nvidia in the version 2.3.6 (performance was slower than OneZeroMiner) and in the just released update to version 2.3.7 things got more interesting. The latest SRBMiner-Multi 2.3.7 (2.5% dev fee DNX, 0% on ZIL) is now faster on Nvidia compared to OneZeroMiner (3% dev fee) and also has lower developer fee and even supports dual mining of Dynex and Zilliqa, so a bit of an extra advantage apart from the higher performance and lower fee. Windows miners would also like the fact that with SRBMiner-Multi they can also take advantage of the GPU clock offset actually working to further lower the power usage as opposed to OneZeroMiner’s one not working under Windows. This means that you can further reduce power usage with SRBMiner-Multi 2.3.7 while also getting higher hashrate and some extra profit from mining ZIL every hour or so for a bit.

So, if you are looking for something that you can GPU mine with profit currently and hold and mine long term then you should definitely take a look at DNX and give it a go. And another tip, get a local Dynex wallet to mine at as most mining pools supporting DNX mining won’t allow you to mine on an exchange address, and it is better to keep the mine coins in a wallet than on an exchange anyway. ZIL dual-mining might be a bit of a challenge with some of the pools not allowing you to dual-mine if both coins are not on their list of supported pools coins (K1Pool with the largest ZIL hashrate at the moment for example) and you might have some trouble using some other pools as well, though Crazypool seems to be working just fine for dual mining DNX and ZIL in our experience, so you might want to give it a go.

Example of SRBMiner-Multi command line for DNX + ZIL mining:
SRBMiner-MULTI --disable-cpu --algorithm dynex --pool eu.dnx.mineradnow.space:18000 --mallob-endpoint https://gomallob.mineradnow.space/ml --wallet DNX_WALLET --password WORKER_ID --zil-enable --zil-pool eu.crazypool.org:5005 --zil-wallet ZIL_WALLET.WORKER_ID --zil-esm 2 --gpu-cclock0 1485 --gpu-mclock0 5001 --gpu-coffset0 200 --zil-cclock 1000 --zil-moffset 1000

Make sure to change DNX_WALLET and ZIL_WALLET to your own wallet addresses and WORKER_ID to your mining rig’s id. For DNX a GPU clock of around 1485 is a good choice and memory at 5001, ZIL core clock of around 1000 (for 3000 series Nvidia) and +1000 on video memory is a good option for ZIL mining. Depending on your GPU an offset of 200-300 should be the sweet spot, so you might want to start from 200 and increase it to around 300 to see what works for you – the higher the value the lower the power usage, but GPUs might become unstable.

– To download the latest SRBMiner-Multi 2.3.7 With Support for DNX and ZIL Dual-Mining…

SRBMiner-MULTI v2.2.0 Released with Dynex Mining Support for AMD, Nvidia and Intel GPUs

8, Mar 2023

The latest update version 2.2.0 of the SRBMiner-MULTI miner comes with support for mining Dynex (DNX) that covers the not only already available Nvidia GPUs (via the official DynexSolve miner), but also adds support for DNX mining on AMD and Nvidia GPUs. The mining fee for mining Dynex with the SRBMiner-MULTI v2.2.0 is currently set at 3%. Earlier this year SRBMiner-MULTI added support for Nvidia GPUs in its major release 2 and since then the miner has introduced and gradually improved support for Intel’s ARC GPUs as well. SRBMiner-MULTI v2.2.0 is the first mining software to offer AMD and Intel ARC miners the ability to mine DNX, though mining DNX is still having issues with pools, so do not be discouraged if you have trouble connecting to a mining pool. This should hopefully soon be resolved as we also do have some trouble properly testing the new release at the moment.

A nice addition to the features for DNX miners from SRBMiner-MULTI is the ability to use multiple mining pools and mallobs, that can help you if you are having pool connectivity issues. There is currently no “adj” option available to set manually the number of Dynex chips to be simulated like on the official DynexSolve miner, but you can use the “--gpu-intensity” parameter for that. Another useful feature is the ability to dual-mine Dynex (DNX) and Zilliqa (ZIL) with SRBMiner-MULTI, so that can help in getting some nice extra profit as opposed to just single mining Dynex. Nvidia users might also try and compare the performance of the official DynexSolve 2.2.5 miner (no dev fee here) to what SRBMiner-MULTI v2.2.0 miner offers on their hardware (3% dev fee), feel free to share your results in the comments below if you do so.

– To download and try the latest SRBMiner-MULTI GPU miner now with Dynex support…


top