Crypto Mining Blog
It Is All About BTC, LTC, ETH, DOGE, KAS mining as well as other alternative crypto currencies
Search
Posts Tagged ‘Ethash’
The latest GMiner 2.07 Nvidia and AMD GPU miner continues improving the Cuckatoo32 performance with the latest update capable of delivering up to +20% performance boost depending on the GPU and OC mode used according to the developer. Definitely a nice improvement worth an updating if you are mining anything that uses the Cuckatoo32 algo, but also have in mind that the default developer fee for the Cuckatoo32 algorithm is set at 3% and is not the standard 2% as for most other algorithms supported by GMiner.
The GMiner miner software was originally only an Nvidia GPU miner, although some algorithms are already supported on AMD GPUs as well. Do note that GMiner is a closed source miner for Nvidia and AMD GPUs with binaries available for both Windows and Linux, there is a 2% developer fee built-in the software.
– To download and try the latest release of the Gminer v2.07 Nvidia and AMD GPU miner…
- Published in: Mining Software
- Related tags: AMD Aeternity, AMD BEAM, AMD Cuckaroo29s, AMD Grin29, AMD SWAP, Beam, Beam miner, BFC, BFC algorithm, BFC miner, BFC mining, Bitfree Cash, Bitfree Cash miner, Bitfree Cash mining, c29, C31, C32, Cortex, Cortex miner, Cortex Nvidia miner, CTXC, Cuckaroo29, Cuckaroo29s, Cuckatoo31, Cuckatoo32, Cuckoo24, CUDA equihash miner, Equihash 125-4, equihash 144-5, Equihash 150-5, Equihash 192/7, equihash 210-9, Equihash 96/5, ETC, ETH, Ethash, Failed to initialize NVRTC library, GMiner, GMiner AMD, GMiner Beam, GMiner CUDA equihash miner, GMiner CUDA miner, GMiner Equihash, GMiner equihash miner, GMiner Linux, GMiner v2.07, GMiner Windows, Grin, Grin miner, Grin Nvidia miner, Grin29, Grin31, Handshake, Handshake miner, HNS, HNS miner, KAWPOW, KAWPOW algorithm, KAWPOW miner, NBMiner, Nicehash, Nvidia CUDA Toolkit, Nvidia ETH miner, Nvidia Ethash miner, PMEER, ProgPoW, ProgPoW miner, ProgPoW mining, Qitmeer, SERO, Super Zero, Super Zero miner, Super Zero mining, SWAP, uupool, ZelCash
The latest TT-Miner 4.0.0 comes with added support for the new algorithm to be used by Ravencoin starting May 6th – KAWPOW, a variation of ProgPoW, as well as the ProgPoW to be used by used by the Veil project for GPU mining with both available for trying out on testnet. The latest TT-Miner also brings support for Tecra (MTP), EtherCore (ERE) and Hanacoin (HANA), so a more significant major release. In order to avoid possible problems with running the miner make sure that instead of overwriting existing older version you are extracting the latest miner to a new folder.
Do note that if you get a missing DLL error when trying to run the miner on Windows you may need to download the latest Microsoft Visual C++ Redistributable for Visual Studio 2015, 2017 and 2019.
TT-Miner supports ProgPOW, Ethash, UBQhash, MTP, Lyra2REv3, Epic, EagleSong and Kadena (Blake2S) algorithms on Nvidia GPUs and is available for Windows and Linux as pre-compiled binaries, a closed source miner with 1% developer fee for all of the supported algorithms.
– For more information and to download and try the latest TT-Miner 4.0.0 for Linux/Windows…
- Published in: Mining Software
- Related tags: CKB, eaglesong, EPIC, ERE EtherCore, Ethash, Ethash NiceHash, HANA, Hanacoin, Kadena, KAWPOW, KDA, MTP, MTP NiceHash, Myriad-Groestl, Nervos, ProgPoW, PROGPOWZ, RavenCoin KAWPOW, RVN KAWPOW, Tecra MTP, TradeTec Miner, TT-Miner, TT-Miner 4.0.0, TT-Miner CUDA miner, TT-Miner Nvidia miner, UBQhash, Veil ProgPow
The latest GMiner 2.05 Nvidia and AMD GPU miner continues improving the recently added Qitmeer (PMEER) support that proved to have quite big demand for CPU power initially. The previous version 2.04 of the miner has improved the situation a bit with the introduction of an additional parameter to reduce CPU load, but the latest update does this even better. The CPU usage has been decreased significantly and should now be fine for GPU mining rigs with lower-end processors mining Qitmeer (PMEER), and there is also a significant performance improvement of up to 30% over what was already available. The only thing that you might not like that much yet is the remaining higher 5% dev fee for that particular algorithm that the miner still has compared to the regular 2% for other algorithms.
The GMiner miner software was originally only an Nvidia GPU miner, although some algorithms are already supported on AMD GPUs as well. Do note that GMiner is a closed source miner for Nvidia and AMD GPUs with binaries available for both Windows and Linux, there is a 2% developer fee built-in the software.
– To download and try the latest release of the Gminer v2.05 Nvidia and AMD GPU miner…
- Published in: Mining Software
- Related tags: AMD Aeternity, AMD BEAM, AMD Cuckaroo29s, AMD Grin29, AMD SWAP, Beam, Beam miner, BFC, BFC algorithm, BFC miner, BFC mining, Bitfree Cash, Bitfree Cash miner, Bitfree Cash mining, c29, C31, Cortex, Cortex miner, Cortex Nvidia miner, CTXC, Cuckaroo29, Cuckaroo29s, Cuckatoo31, Cuckoo24, CUDA equihash miner, Equihash 125-4, equihash 144-5, Equihash 150-5, Equihash 192/7, equihash 210-9, Equihash 96/5, ETC, ETH, Ethash, Failed to initialize NVRTC library, GMiner, GMiner AMD, GMiner Beam, GMiner CUDA equihash miner, GMiner CUDA miner, GMiner Equihash, GMiner equihash miner, GMiner Linux, GMiner v2.05, GMiner Windows, Grin, Grin miner, Grin Nvidia miner, Grin29, Grin31, Handshake, Handshake miner, HNS, HNS miner, KAWPOW, KAWPOW algorithm, KAWPOW miner, NBMiner, Nicehash, Nvidia CUDA Toolkit, Nvidia ETH miner, Nvidia Ethash miner, PMEER, ProgPoW, ProgPoW miner, ProgPoW mining, Qitmeer, SERO, Super Zero, Super Zero miner, Super Zero mining, SWAP, uupool, ZelCash