Posts Tagged ‘Grin Nvidia miner’

New Bminer 13.0.0 is Currently The Fastest GRIN Miner for Nvidia

22, Jan 2019

The latest Bminer 13.0.0 should be the preferred choice for a Nvidia GPU miners that are currently mining Grin as it offers the best performance at the moment compared to other available miners. However there are still some things that may need extra work such as full worker support for Sparkpool (one of the first and largest currently available for Grin mining). At the moment you can use Bminer with Sparkpool, but all your rigs will be under a single worker called “miner-rig-0” as the worker setting of the pool interfere with the settings for pool, username and password schema that Bminer uses. The extra performance of up to about 50-60% compared to other miners such as NBminer or GMiner and others is well worth it. There is apparently a way to actually setup a worker on Sparkpool, you just need to escape the slash used for setting up a worker name and it will work just fine, here you ca find a short guide on how to do it.

We remind you that that Bminer is a closed source Nvidia GPU miner available for Linux and Windows in the form of pre-compiled binaries and that there is a 2% development fee for Grin, Beam, Bytom (BTM), Equihash and Zhash coins, 0.65% for Ethash and 1.3% for dual mining Ethash and Blake.

– To download and try the latest release of the Bminer 13.0.0 Nvidia GPU miner…

GMiner CUDA Equihash Miner v1.19 With GRIN (Cuckaroo29) Support

17, Jan 2019

GMiner has just added support for the new Cuckaroo29 algorithm being used by Grin with the latest update to version 1.19. This marks the first non-Equihash algorithm getting support in the miner and maybe it will also open the doors for other algorithms to get implemented in the future. Performance wise it may not be the fastest Grin miner out there, but it does seem to work quite well based on our short experience with the new version for now, so you might want to give it a try. Due t the higher video memory requirements of the Cuckaroo29 algorithm you will need to have an Nvidia GPU with 8GB VRAM (about 7GB are currently required) as well as enough virtual memory available. Also it seems that the Grin mining implementation does require a faster CPU for optimal performance, on slower processors you might experience some slowdowns in which case you might want to go for a other miner.

Apart from Cuckaroo29 GMiner also supports Equihash 96,5, Equihash 144,5, Equihash 150,5, Equihash 192,7 and Equihash 210,9. The miner requires an Nvidia GPU with CUDA compute capability 5.0 or later as well as CUDA 9.0 driver support. Do note that GMiner is a closed source miner for Nvidia GPUs with binaries available for both Windows and Linux, also there is a 2% developer fee built-in the software.

– To download and try the latest release of the Gminer v1.19 CUDA Equihash miner…

Grin Mainnet Launching Today, Are You Ready for Mining

15, Jan 2019

Grin is a new crypto project for creating a the private and lightweight mimblewimble blockchain that would provide electronic transactions for everyone without censorship or restrictions. The algorithm that Grin uses is Cuckoo Cycle with 1 minute block time, 60 GRIN block reward and no limit on coin supply or reward halving. There is not going to be any ICO, founders reward, pre-mine or masternodes available for this project, so people that do not like any of these should be Ok with this project. Miners for Grin are still currently being developed, although there are some already announced or available, though initially it could be a bit of a challenge to make things work with the right miner and pool. For instance the official MWGrinPool is currently not taking new registrations, though new pools should be available as alternatives. There are already a couple of options for pools on the Testnet where you can test the mining before the Mainnet launch like Spark Pool. Some good places to trade GRIN include CoinEgg, Gateio, HitBTC and Bittrex.

The official open-source Grin Miner software is currently only available for Linux and Mac OS X and it supports both CUDA and OpenCL mining. For miners looking for Windows miners there is the Grin Gold Miner (with 1% fee for the Grin Development Fund and 1% fee for further miner development), although it also works with Linux) that supports all AMD and NVIDIA 8GB cards (requires a GPU with 8GB VRAM!). Do note however that Nvdia RTX 8GB cards need Linux or Windows 7 due to memory addressing issues. RTX 2080 and RTX 2080 Ti are fastest in terms of performance if you manage to make them work, OpenCL code for AMD cards is currently still being optimized. Cheaper slower Celeron CPUs are not recommended for many cards on the system (similar to Merit and BITC that also use the same algorithm for mining). Another alternative for Windows miners should be the GrinPro Miner that is not yet available for download and that will have 2% developer fee. This miner should work on AMD and Nvidia GPUs with 8GB VRAM, although it promises upcoming support for 6GB VRAM cards as well, so that could be interesting for some users.

Unfortunately zjazz, who was pretty active in miner development for Cuckoo Cycle support for Merit and BITC hasn’t updated his miner for a while and will probably not be supporting Grin mining at least for the moment. The latest version of Bminer that was just made available however also comes with experimental support for mining Grin, so you might want to check it out as well. Do note that it is a closed source miner with 2% developer fee, so have that in mind as well when checking out different miners for Grin. The latest version of the closed source miner NBMiner has also just added support for the Cuckaroo algorithm used by Grin (both Windows and Linux), so you can give it a try as well (Nvidia only).


top