Posts Tagged ‘Grin29’

New NBMiner 26.1 With Improved Nvidia Performance for CKB and Dual Mining on AMD

15, Nov 2019

The latest NBMiner 26.1 update comes with a bit of improvement in the performance for mining CKB on Nvidia GPUs as well as support for Dual Mining ETH + CKB on AMD GPUs (dual mining was already available for Nvidia users). This update is just in time for the official launch for the Nervos CKB mainnet launch planned for tomorrow that uses the Eaglesong mining algorithm. Aside from NBMiner, you can also use GMiner and SRBMiner-MULTI for the Eaglesong algorithm, though with the latest update NBMiner should be slightly faster on Nvidia than GMiner.

We remind you that the NBMiner is a closed source GPU miner for Nvidia CUDA and now AMD as well that is available for both Windows and Linux operating systems and it has the following developer fee built-in: tensority_ethash 3%, tensority (Pascal) 2%, tensority (Turing) 3%, ethash 0.65%, cuckaroo & cuckatoo & cuckaroo_swap 2%, progpow_sero 2%, sipc 2%, bfc 3%.

– To download and try the latest NBMiner 26.1 Nvidia and AMD GPU Miner for Windows/Linux…

New GMiner 1.74 With Performance Improvements for Cuckatoo31

14, Nov 2019

The latest GMiner 1.74 miner has introduced significant performance improvements for Cuckatoo31 algorithm used by GRIN according to the mining software’s developer. We are seeing some improvement on GTX 1080 Ti and with Cuckatoo31 for GRIN and on NiceHash currently performing well compared to everything else in terms of profitability for GPU mining it might be worth giving the new miner a go. Below you can find some official performance results from GMiner’s developer on different Nvidia GPUs using the latest version 1.74, so that you can compare with your own hardware. Do note that this update does not yet include dual mining CKB+ETH, still only Eaglesong mining alone is possible.

Cuckatoo31 performance on stock GPU settings:
– Palit GTX 1070 Dual 8GB ~0.86 G/s
– MSI GTX 1080 SEA HAWK EK X 8GB ~0.96 G/s
– Gigabyte GTX 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~1.64 G/s
– MSI RTX 2070 Armor 8GB ~1.33 G/s

The GMiner miner software was originally only an Nvidia GPU miner, although some algorithms are already supported on AMD GPUs as well. Do note that GMiner is a closed source miner for Nvidia and AMD GPUs with binaries available for both Windows and Linux, there is a 2% developer fee built-in the software.

– To download and try the latest release of the Gminer v1.74 Nvidia and AMD GPU miner…

New GMiner v1.71 With Ethash Algorithm Support for Nvidia GPUs

31, Oct 2019

The latest GMiner 1.71 miner has added support for the Ethash algorithm on Nvidia GPUs allowing you to use the miner for mining ETH and ETC for the moment with other coins to be supported in the future. The developer fee of the Ethash algorithm is set at 0.65% instead of the regular 2 percent for other algorithms supported by the miner. Do note that if you are using an Nvidia GPU with GDDR5X video memory such as the GTX 1080 series you should also run the OhGodAnETHlargementPill tool for optimal performance when mining Ethash using GMiner. A quick test has shown that the performance on GTX 1080 Ti with the Pill software running is a little lower than what the latest Claymore Dual Ethereum AMD+NVIDIA GPU Miner v15.0 is capable of delivering, so there might be some more room for improvement in future updates.

The GMiner miner requires an Nvidia GPU with CUDA compute capability 5.0 or later as well as CUDA 9.0 driver support, some algorithms are already supported on AMD GPUs as well, but not all. Do note that GMiner is a closed source miner for Nvidia and AMD GPUs with binaries available for both Windows and Linux, also there is a 2% developer fee built-in the software.

– To download and try the latest release of the Gminer v1.71 Nvidia and AMD GPU miner…


top