Posts Tagged ‘ProgPoW’

RavenCoin (RVN) Forking to New KAWPOW Algorithm in April

28, Mar 2020

The RavenCoin (RVN) project is up for another fork sometime in April that will change once more the Proof of Work mining algorithm used in order to fend off FPGA and ASIC miners specifically and allow GPU miners to get back to mining the coin. The first fork to change the mining algorithm in October last year changed the initial algo to a new X16Rv2 and while that did drive off ASIC and FPGA miners for a while off the network, it did not help that much on the long run as apparently specialized mining hardware was quickly adapted to the new algorithm. This time the change in the algorithm is more drastic and should make sure that GPU mining on a level playing field for both AMD and Nvidia GPU miners is available for long…

The new algorithm that RVN will be adopting is called KAWPOW and is a derivative of ProgPOW with parameters specific for Ravencoin. The fork is planned for sometime in April, but a specific block time and expected date is not yet chosen. Meanwhile you are welcome to test the new dedicated miner called kawpowminer software that currently only supports mining the new algorithm and you can test it on the RavenCoin testnet using the MinerMore mining pool to make sure you are ready for the fork.

RavenCoin KAWPOW testnet pool:
kawpowminer -U -P stratum+tcp://WALLET.worker@rvnt.minermore.com:4505

The miner is currently available for both Windows and Linux operating systems, though apparently there is not yet official OpenCL binary for Windows, only CUDA. Since the binary releases do not include the required Nvidia CUDA 10.2 libraries you would also need to have the latest Nvidia CUDA Toolkit installed (or at least the runtime libraries from it). Other popular mining software would most likely add the required support for the new algorithm soon before or after the fork to the new algorithm occurs.

Expected performance on stock settings:
– GTX 1050Ti: ~5+ MH/s
– GTX 1060: ~9.5 MH/s
– GTX 1070: ~14 MH/s
– GTX 1070Ti: ~14 MH/s
– GTX 1080Ti: ~24.5 MH/s

We remind you that unlike with Ethash, PROGPOW does not favor lower-end AMD GPUs as it is not so much memory dependent, thus a lower-end AMD GPU will perform similarly to the same level of Nvidia GPU and a higher-end AMD GPU like a similar class Nvidia GPU when using the new KAWPOW algorithm!

New GMiner 2.03 With Support for Qitmeer (PMEER) Mining

22, Mar 2020

The latest GMiner 2.03 GPU miner adds support for the Qitmeer (PMEER) mining, however do not be in a hurry to try mining using the Cuckoo24 algorithm that has been just added. Have in mind that the Qitmeer (PMEER) mining support comes with a 5% developer fee and is apparently CPU intensive, so you might have trouble using the latest GMiner with Qitmeer (PMEER) mining on mining rigs with most typical dual-core lower performance processors. Frankly we are a bit disappointed that the official release notes do not mention the higher developer fee for the new algorithm, nor that it is apparently heavier in terms of CPU requirements.

The GMiner miner software was originally only an Nvidia GPU miner, although some algorithms are already supported on AMD GPUs as well. Do note that GMiner is a closed source miner for Nvidia and AMD GPUs with binaries available for both Windows and Linux, there is a 2% developer fee built-in the software.

– To download and try the latest release of the Gminer v2.03 Nvidia and AMD GPU miner…

New GMiner 2.00 With Support for ProgPoW (SERO) Algorithm

9, Mar 2020

The latest GMiner 2.00 miner adds support for the ProgPoW algorithm used by the Super Zero (SERO) project. SERO’s use of the ProgPow mining algorithm is not new,but apparently it has lately caught more attention of users and hence more happening around the project lately. There is a catch however, the ProgPow support of Gminer requires you to have the latest Nvidia CUDA Toolkit installed or you will be getting the “Failed to initialize NVRTC library” error message wen trying to run the miner software for mining SERO. This is a few gigabytes of installation package, though in theory you can get the smaller network installer and select to install only the Runtime Libraries and not the full package that includes unnecessary data as far as mining is concerned and no actual CUDA software development is required… nevertheless it is bothersome requirement for a mining software. Older algorithms supported by the miner should work fine without the CUDA Toolkit, so it is a requirement only if you want to mine SERO with the latest GMiner.

The GMiner miner software was originally only an Nvidia GPU miner, although some algorithms are already supported on AMD GPUs as well. Do note that GMiner is a closed source miner for Nvidia and AMD GPUs with binaries available for both Windows and Linux, there is a 2% developer fee built-in the software.

– To download and try the latest release of the Gminer v2.00 Nvidia and AMD GPU miner…


top