Posts Tagged ‘RVN KAWPOW’

New NBMiner 30.0 With Memory Timings Optimization for Nvidia GPUs

30, Apr 2020

The latest NBMiner 30.0 update comes with a built-in replacement for the OhGodAnETHlargementPill memory timings optimization tool for Nvidia GPU owners of GTX 1080 and GTX 1080 Ti with GDDR5X video memory. The implementation from NBMiner does however requires the use of a custom unsigned driver under Windows and admin privileges under Linux, so not as easy as just running a custom executable file to enable the tweaks. Once implemented however it could allow for greater flexibility as you have the option to use different levels of optimizations for the memory timings via command line parameters. Have in mind that not all crypto algorithms may benefit from memory timings optimization, here are the two options you need to use to enable and activate the memory tings optimizations in the latest version of NBMiner.

--mt, --memory-tweak Memory timings optimize for Nvidia GDDR5 & GDDR5X gpus. range [1-6]. Higher value equals higher hashrate. Individual value can be set via comma seperated list. Power limit may need to be tuned up to get more hashrate. Higher reject share ratio can happen if mining rig hits high temperature, set lower value of -mt can reduce reject ratio. Under windows, a custom driver need to be installed before using -mt, see description of --driver for more detail. Admin priviledge is needed to run under linux, sudo ./nbminer -mt x. OhGodAnETHlargementPill is not needed anymore if -mt is enabled when mining on 1080 & 1080ti GPUs.
--driver Windows only option, install / uninstall driver for memory tweak. Run with admin priviledge. install: nbminer.exe --driver install, uninstall: nbminer.exe --driver uninstall. Note: the installed custom driver is not signed by microsoft, users need to disable secure boot in BIOS settings to get the driver work.

We remind you that the NBMiner is a closed source GPU miner for Nvidia CUDA and now AMD as well that is available for both Windows and Linux operating systems and it has the following developer fee built-in: tensority_ethash 3%, tensority(Pascal) 2%, tensority(Turing) 3%, ethash 0.65%, cuckaroo & cuckatoo & cuckaroo_swap 2%, progpow_sero 2%, sipc 2%, bfc 3%, hns 2%, hns_ethash 3%, trb 2%, trb_ethash 3%, kawpow 2%.

– To download and try the latest NBMiner 30.0 Nvidia and AMD GPU Miner for Windows/Linux…

TT-Miner 4.0.0 Nvidia GPU Miner With KAWPOW Support And More

20, Apr 2020

The latest TT-Miner 4.0.0 comes with added support for the new algorithm to be used by Ravencoin starting May 6th – KAWPOW, a variation of ProgPoW, as well as the ProgPoW to be used by used by the Veil project for GPU mining with both available for trying out on testnet. The latest TT-Miner also brings support for Tecra (MTP), EtherCore (ERE) and Hanacoin (HANA), so a more significant major release. In order to avoid possible problems with running the miner make sure that instead of overwriting existing older version you are extracting the latest miner to a new folder.

Do note that if you get a missing DLL error when trying to run the miner on Windows you may need to download the latest Microsoft Visual C++ Redistributable for Visual Studio 2015, 2017 and 2019.

TT-Miner supports ProgPOW, Ethash, UBQhash, MTP, Lyra2REv3, Epic, EagleSong and Kadena (Blake2S) algorithms on Nvidia GPUs and is available for Windows and Linux as pre-compiled binaries, a closed source miner with 1% developer fee for all of the supported algorithms.

– For more information and to download and try the latest TT-Miner 4.0.0 for Linux/Windows…

RavenCoin (RVN) Forking to New KAWPOW Algorithm on May 6th

16, Apr 2020

RavenCoin (RVN) will be switching mining algorithms from the currently used X16Rv2 to the new KAWPOW on May 6th 2020 at 18:00:00 UTC. The new algorithm called KAWPOW is a derivative of ProgPOW with parameters specific for Ravencoin, so performance wise you can expect similar hashrate as what ProgPow delivers. There is an official kawpowminer as well as some popular alternative miners supporting the new algorithm such as NBMiner and GMiner, TT-Miner is also testing support, though only in beta for now and other miners will most likely also add it soon. You can already try mining KAWPOW on RVN’s testnet and in just about 3 weeks from now KAWPOW will be on Ravencoin’s mainnet. In order to make sure you are ready to support the upcoming hardfork to the KAWPOW algorithm you must update to the latest Ravencoin v4.0.0 binaries that were just made available, have in mind that there could be additional fixes and updates released prior the fork, o make sure you stay up to date. The upcoming hardfork is supposed to drive away once more any FPGA/ASIC miners and provide fair mining conditions for GPU miners.

– To download the latest Ravencoin v4.0.0 binaries ready for the upcoming hardfork…


top