Search Results

gridseed-new-19-mhs-asic-miner

Do you remember the 19.2 MHS Scrypt and 520 GHS SHA-256 Dual Mode ASIC that we have reported about being available for pre-order form a Chinese seller. We have expressed our doubts about that product and it turns out it will not be available by the end of this month, though the seller claims it is something that Gridseed is currently working on. So we might actually see the product in some form available in a bit of time, but for now you can be rest assured it is not going to hit the market anytime soon. If we see the 19.2 GHS Scrypt mining ASIC in a few months however it might be a bit too late as other ASIC manufacturers are already promising shipping date for more powerful Scrypt miners to be out before the end of the year…

Below you can read the official quote from the seller as a response to the user interest in the 19.2 MHS miner that they have listed for pre-orders:

Dear customers,

Thank you so much for your interest in the super miner (520GH/19.2MH) shown at our store before, we decided to take it down before more information is available.

We got this product info from an agent of Gridseed. And we were told that the miner would be available at the end of March. So we put it at our store. Unexpectedly, it has generated a lot of interest and doubts alike in the mining circle. And we have received messages from a lot of customers, who are both interested and doubtful, which is very understandable, because the information was limited and no one has actually used this product yet.

And we have to clarify one fact: WE ARE NOT SCAMMERS. Firstly, we didn’t take any order of the product. None. Secondly, we have been receiving very positive feedbacks from our customers. Anyone who has worked with us knows that we are an honest store. Thirdly, it was not intended as a marketing ploy either. We saw new products coming, we put them at our store, that’s it.

So under these circumstances, with the attitude of being responsible to our customers, we decided to take it down until more information is available.

At the same time we are requesting for more info and wait until we know better.

Thank you so much.

gridseed-new-19-mhs-asic-miner

We got a tip from a reader that a new dual mining mode ASIC device based on Gridseed chips might be coming out soon. The device is supposedly capable of providing up to 19.2 MHS Scrypt and 520GHS SHA-256 is listed for with a price of $12888 USD on a Chinese online store and is being sold by a company called EastShore Trade. This is a pre-order and they claim the miner will be available “at the end of March”. The photo above of the actual miner does look Ok, though the photo itself and the claimed specifications do rise some doubts, so you should treat this information with caution for the moment!

This miner is apparently composed of 4 blades (only one blade shown on the photo or all 4 blades together?), each blade can mine at a speed of 130 GH/s for SHA-256 mining and 4.8 MH/s for Scrypt mining. So, the miner can mining at a speed of 520 GH/s for SHA256 mining and 19.2 MH/s for Scrypt mining in total. The total power consumption claimed is just 800W for the four blades and the power supply is apparently a part of the miner according to the information. The miner on the photo does remind us a lot in terms of design to the AntMiner S1 and the device apparently also comes with a LAN port, so it would be independent of a computer.

19.2 MH/s worth of Scrypt mining hashrate is achievable by using a total of 64×5 Gridchip GC3355 processors or a total of 320 chips providing 300 KHS each. With the total power usage of a non-overclocked 5-chip ASIC of about 5W we should be getting about 320W for Scrypt only mining mode if the calculation is correct. The problem comes with the SHA-256 mining part, with a 5-chip solutions needing roughly about 50W in BTC mining mode this would result in 3200W power consumption for the SHA-256 mining only or a total of 3500W without overclock for Dual Mining mode. So how come we see claimed 800W for the device, this could neither be the Scrypt only power usage, neither a single blade one (4 blades shod total in 3200W). And integrating a 3200W or 3500W power supply in a miner so small does not seem very believable (again is the photo of a single blade or of the 4 blades?). So do not be in a hurry with pre-orders at least until there is more clear information about this upcoming ASIC!

zeushash-new-price-promotion

It seems that ZeusMiner is now pretty much a cloud mining service provider as the company is apparently moving towards focusing on offering Bitcoin and Litecoin cloud mining hashrate though their service ZeusHash. The company has been announcing multiple partnerships with other ASIC manufacturers, but the focus of these is towards getting mining hardware for their cloud mining service as apparently ZeusMiner has no plans to continue making hardware themselves after canceling their GEN III product plans. A new partnership has been announced with Gridseed as a hardware provider for the cloud mining operation along with a slight reduction of the current maintenance fees from $0.059 to $0.058 USD per MHS for the Scrypt hashrate. Gridseed has been silent for a while now after being the first company to go out with Scrypt ASIC miners earlier this year and they are probably working on the next generation hardware already. Regarding the cloud mining pricing, ZeusHash has also announced a Thanksgiving Promotion on the Litecoin MHS prices that will be running from November 17th to 27th. The new prices might be of interest mostly to people that are willing to invest in more serious hashrates as then the prices become more attractive. The not so good news is that apparently the Litecoin network difficulty is seeing some significant increases lately, so making bigger investments at the moment may not be the wisest idea. Interestingly enough we are yet to see a cloud mining provider offering some great deals for the upcoming Black Friday.

For more information about the current price promotions from ZeusHash….


top