Crypto Mining Blog
It Is All About BTC, LTC, ETH, DOGE, KAS mining as well as other alternative crypto currencies
Search
Search Results
Feathercoin (FTC) has hard forked from the Scrypt algorithm to the NeoScrypt as was announced earlier this year after block 432000. You need to update your wallet to Feathercoin 0.8.7.0 in order to continue using it after the NeoScrypt update and you need to download a special version of cgminer with support for the NeoScrypt algorithm (link below). The goal of the hard fork away from the Scrypt algorithm is to make FTC not mineable with Scrypt ASIC miners giving back the opportunity to GPU miners to mine the coin. Currently the profitability of mining FTC is quite high compared to other coins that are being mined with GPUs, so there is high interest in Feathercoin at the moment. Do note that here is no special miner dedicated for Nvidia miners to mine NeoScrypt using CUDA, however the version of the cgminer with NeoScrypt support actually works quite well not only on AMD, but on Nvidia GPUs as well using OpenCL. The screenshot above is from a GeForce GTX 750 Ti video card at stock frequencies giving a bit over 40 KHS and with some overclock you should be able to push the performance of a single GTX 750 to about 50 KH/S.
Mining with cgminer 3.7.7B with NeoScrypt support (source) on AMD GPUs has something that you make sure to do to get the best performance out of your GPUs. You need to make sure you have Catalyst drivers 13.11 installed, and then run the cgminer to compile the kernel with the settings you are using, then update to the latest 14.9 drivers and run the miner with the already generated kernel (BIN) file with the old drivers. Make sure you don’t change settings affecting the kernel after getting back to the latest video drivers as this will invoke the compilation of a new kernel that will not work and you will most likely be getting HW errors only. Generating kernel with newer drivers and not using a kernel generated with the older 13.11 drivers will not work and you will be getting only hardware errors instead of actual work being done. This is a bit of inconvenience, but you will have to do the driver trick only once and hopefully there will be a fix for this in the future as well as further performance improvements. Currently we are getting about 90-100 KH/s on a single AMD Radeon R9 280X GPU, so the performance on Nvidia graphics cards compared to AMD is looking very nice considering that we are using OpenCL and not CUDA.
– You can download the cgminer 3.7.7b with NeoScrypt support for Windows OS here…
Last month we have done some initial GeForce GTX 980 crypto mining benchmarks with the announcement of the new Maxwell GPUs from Nvidia. Now we got our hands on a Gigabyte GeForce GTX 970 G1 Gaming video card (GV-N970G1 GAMING-4GD ) and have decided to run some tests to see how well it will fare against a standard reference design GTX 980 again from Gigabyte (GV-N980D5-4GD-B). The reference design GTX 980 we’ve used is running at stock frequencies, including the boost one and the results below are with the card not additionally overclocked, even though it can take quite an increase in the frequency. The Gigabyte GeForce GTX 970 G1 Gaming card however is factory overclocked to a really high frequencies as compared to the stock ones and there is not that much left for the user to add, though some extra overclocking is also possible. The G1 Gaming card from Gigabyte also comes with the company’s Windforce cooler that proved to be a very good and silent cooling solution even when you overclock. Also the GTX 970 model is with a factory increased max TDP level to go along with the overclock the 100% of the power limit actually represents 250W instead of 145W or 165W. This leaves a lot of headroom for more power hungry crypto mining algorithms, even though in our tests not a single algorithm was able to hit 100%. The closes we got was about 90% of the increased TDP reached with the groestl algorithm most others were keeping in the 60-70% of the 250W TDP limit.
The results you can see in the table above are achieved with the ccMiner release 1.4.5-tpruvot using Compute 5.2 compiled binaries. This might not be the single best performing fork of ccminer available, however it is probably the one with most comprehensive support for various crypto algorithms (we tested with all of the supported ones) and with support for Compute 5.2. Some other forks might be able to provide slightly better hashrate on a specific algorithm, but the idea here was to do a comparison between a reference GTX 980 and a factory overclocked GTX 970 to see what you can expect in terms of performance. The results are pretty interesting as the factory clocked G1 card is getting very close to a stock GTX 980 and with some extra user overclock it might even achieve the same results. Considering the fact that the GTX 970 is still much better priced than the GTX 980 we can easily conclude that the GTX 970 and especially GTX 970 G1 Gaming from Gigabyte is a really good choice not only for gaming, but also for mining crypto currencies.
- In: Mining Hardware|Tests and Reviews
- Tags: GeForce GTX 980, Gigabyte, Gigabyte G1 Gaming, Gigabyte GTX 970, Gigabyte GTX 980, GTX 970, GTX 970 hashrate, GTX 970 mining hashrate, GTX 970 mining performance, GTX 980 ccminer, GTX 980 crypto mining, GTX 980 for mining, GTX 980 hashrate, GTX 980 mining performance, GV-N970G1 GAMING-4GD, GV-N980D5-4GD-B, Nvidia, Nvidia GeForce GTX 980
Nvidia has just introduced their new high-end Maxwell-based GPUs the GTX 980 and GTX 970 and the expectations from them in terms of performance for crypto mining are pretty high. After earlier this year we saw what the mid-range GTX 750 Ti, the first Maxwell card was capable of, we already had high hopes for the upcoming faster models. Apparently we are not going to be disappointed by the performance we are going to get, below you can see a chart with the hashrate that the new GeForce GTX 980 (GM204) provides in various crypto algorithms. These were actual tests ran using the latest versions of CudaMiner and ccMiner with support for Compute 5.0 with no special optimizations that could possibly benefit the new cards any further.
In the table you can see the algorithm, the hashrate you get with the GTX 980 and the TDP usage percentage. The GeForce GTX 980 has a TDP rating of just 165 Watts, so with this maximum power consumption you can see that not all algorithms are utilizing it at 100%, meaning the actual power usage is lower. The performance you can expect to get from the GTX 980 is roughly about three times higher with about three times more power usage as compared to the GTX 750 for crypto mining. The initial price of the GTX 980 however could be a reason for miners to go to the slightly slower GTX 970 model for crypto mining as you should be able to get two GTX 970s for a price a bit higher than for a single GTX 980 and the performance you will get from the two cards should be significantly better than from a single GTX 980.
The results posted above are with a reference GTX 980 card running at stock frequency, considering that the GM204 does overclock really good, higher results can be attained when the card is overclocked. The second set of results (the OC ones) are achieved with the card overclocked to GPU at 1520 MHz, Video RAM to 8250 MHz and TDP limiter set to the maximum 125%. This is really pushing the GTX 980 to its stable maximum limits as the card really does handle serious overclock pretty well. Unfortunately we do not have access to a GTX 970 GPU for the moment, so we cannot yet test to see the difference in performance, though it should not be that high, but the 970 should be available at a much more attractive price, so it could be the more obvious choice for crypto mining rigs. The GTX 750 Ti still seems like a good more budget oriented solution for mining.
You should be well aware of the fact that some ccMiner forks are nor working very well with the GTX 980, we’ve had some weird results showing like way too little load and low hashrate or the miner crashing, also one of the reasons that not all available algorithms are listed. The GTX 980 and GTX 970 does support Compute 5.2 and not all forks of ccMiner we have used for testing are compiled to even support the Compute 5.0, the CudaMiner has not been updated for a while and we have used the latest official release for the Scrypt testing… not that you would use a GPU nowadays to mine Scrypt crypto coins anyway.