Posts Tagged ‘Grin’

Latest Bminer 14.1.0 and NBMiner 14.0 With Massive BTM Improvement on Nvidia RTX GPUs

31, Jan 2019

The latest releases of Bminer 14.1.0 and NBMiner 14.0 have announced pretty impressive performance increases regarding Bytom (BTM) mining hashrate on the new Nvidia RTX series of GPUs with up to about 200% boost, so a significant improvement indeed. This essentially makes the RTX series of GPUs the best choice for BTM mining with two to tree times faster hashrates compared to what their older GTX counterparts are able to deliver at the moment.

Another new improvement that goes for both miners is the additional performance improvement in the range of about 30% for GRIN mining with hashrates very close for the two miners. Bminer also brings similar performance improvement for Aethernity like for Grin. So make sure you do try them both to see what may work better on your specific GPUs and settings if you are currently mining GRIN. Our tests are showing that the latest GMiner 1.25 still seems slightly faster on GTX 1080 Ti GPUs compared to what we are getting on the same hardware with the latest BMiner and NBMiner, so make sure you check out the latest Gminer as well.

New Bminer 13.0.0 is Currently The Fastest GRIN Miner for Nvidia

22, Jan 2019

The latest Bminer 13.0.0 should be the preferred choice for a Nvidia GPU miners that are currently mining Grin as it offers the best performance at the moment compared to other available miners. However there are still some things that may need extra work such as full worker support for Sparkpool (one of the first and largest currently available for Grin mining). At the moment you can use Bminer with Sparkpool, but all your rigs will be under a single worker called “miner-rig-0” as the worker setting of the pool interfere with the settings for pool, username and password schema that Bminer uses. The extra performance of up to about 50-60% compared to other miners such as NBminer or GMiner and others is well worth it. There is apparently a way to actually setup a worker on Sparkpool, you just need to escape the slash used for setting up a worker name and it will work just fine, here you ca find a short guide on how to do it.

We remind you that that Bminer is a closed source Nvidia GPU miner available for Linux and Windows in the form of pre-compiled binaries and that there is a 2% development fee for Grin, Beam, Bytom (BTM), Equihash and Zhash coins, 0.65% for Ethash and 1.3% for dual mining Ethash and Blake.

– To download and try the latest release of the Bminer 13.0.0 Nvidia GPU miner…

GMiner CUDA Equihash Miner v1.19 With GRIN (Cuckaroo29) Support

17, Jan 2019

GMiner has just added support for the new Cuckaroo29 algorithm being used by Grin with the latest update to version 1.19. This marks the first non-Equihash algorithm getting support in the miner and maybe it will also open the doors for other algorithms to get implemented in the future. Performance wise it may not be the fastest Grin miner out there, but it does seem to work quite well based on our short experience with the new version for now, so you might want to give it a try. Due t the higher video memory requirements of the Cuckaroo29 algorithm you will need to have an Nvidia GPU with 8GB VRAM (about 7GB are currently required) as well as enough virtual memory available. Also it seems that the Grin mining implementation does require a faster CPU for optimal performance, on slower processors you might experience some slowdowns in which case you might want to go for a other miner.

Apart from Cuckaroo29 GMiner also supports Equihash 96,5, Equihash 144,5, Equihash 150,5, Equihash 192,7 and Equihash 210,9. The miner requires an Nvidia GPU with CUDA compute capability 5.0 or later as well as CUDA 9.0 driver support. Do note that GMiner is a closed source miner for Nvidia GPUs with binaries available for both Windows and Linux, also there is a 2% developer fee built-in the software.

– To download and try the latest release of the Gminer v1.19 CUDA Equihash miner…


top