Posts Tagged ‘Handshake miner’

New NBMiner 29.0 With Support for The New KAWPOW PoW Algorithm

3, Apr 2020

The latest NBMiner 29.0 update comes with added support for the KAWPOW algorithm that is going to soon be used by RavenCoin (RVN)… most likely. The KAWPAW algorithm is based on ProgPoW with some parameters specific for Ravencoin, so a regular ProgPow miner won’t do. So now, besides the official kawpowminer and the recently released Gminer with KAWPOW support you also have a third alternative in the form of the latest NBMiner and others will most likely follow as well. It seems however that all of the miners could be based on the same reference ProgPow codebase and there is currently not much of a performance difference apparently, so it is more like which one you are more used to. Below you can see an official list of the expected performance on popular mining GPUs at default stock settings for the KAWPOW algorithm when using NBMiner:

NBMiner 29.0 KAWPOW Expected Performance:
– Nvidia P106-100: 10.3 MH/S
– Nvidia P104-8G: 17.5 MH/S
– Nvidia GTX 1070 Ti: 13.3 MH/s
– Nvidia GTX 1080 Ti: 22.5 MH/s
– Nvidia GTX 2080: 25.8 MH/s
– AMD Radeon RX 580: 10.3 MH/s

We remind you that the NBMiner is a closed source GPU miner for Nvidia CUDA and now AMD as well that is available for both Windows and Linux operating systems and it has the following developer fee built-in: tensority_ethash 3%, tensority(Pascal) 2%, tensority(Turing) 3%, ethash 0.65%, cuckaroo & cuckatoo & cuckaroo_swap 2%, progpow_sero 2%, sipc 2%, bfc 3%, hns 2%, hns_ethash 3%, trb 2%, trb_ethash 3%, kawpow 2%.

– To download and try the latest NBMiner 29.0 Nvidia and AMD GPU Miner for Windows/Linux…

New GMiner 2.05 With Improved Performance for Qitmeer (PMEER)

3, Apr 2020

The latest GMiner 2.05 Nvidia and AMD GPU miner continues improving the recently added Qitmeer (PMEER) support that proved to have quite big demand for CPU power initially. The previous version 2.04 of the miner has improved the situation a bit with the introduction of an additional parameter to reduce CPU load, but the latest update does this even better. The CPU usage has been decreased significantly and should now be fine for GPU mining rigs with lower-end processors mining Qitmeer (PMEER), and there is also a significant performance improvement of up to 30% over what was already available. The only thing that you might not like that much yet is the remaining higher 5% dev fee for that particular algorithm that the miner still has compared to the regular 2% for other algorithms.

The GMiner miner software was originally only an Nvidia GPU miner, although some algorithms are already supported on AMD GPUs as well. Do note that GMiner is a closed source miner for Nvidia and AMD GPUs with binaries available for both Windows and Linux, there is a 2% developer fee built-in the software.

– To download and try the latest release of the Gminer v2.05 Nvidia and AMD GPU miner…

New GMiner 2.04 With Support for the New KAWPOW Algorithm

29, Mar 2020

It did not take long and now the latest GMiner 2.04 GPU miner had added support for the new KAWPOW mining algorithm that RavenCoin (RVN) might/could/should/would be forking to sometime in April. The KAWPOW algorithm is a derivative of ProgPOW with parameters specific for RavenCoin, so another miner with ProgPoW support will not work unless specific RVN support is added like in the case of GMiner that already had ProgPoW support, but needed an update for KAWPOW support. Do note that support for KAWPOW is currently only available for Nvidia GPUs and that goes for ProgPoW as well. You can already test KAWPOW support on the RavenCoin test network to get ready your miner, there miner RVNt testnet tokens do not have any value though.

Besides the new algorithm being added, the latest version of GMiner addresses an issue we have noted regarding high CPU usage in Qitmeer (PMEER) support. There is a new “--trim” parameter being introduced to control additional trim round count for Cuckoo24 (Qitmeer) algorithm that should help reduce CPU load, so you can give it a try and see if it helps if you have any GPU mining rigs with lower-end CPUs that have high CPU load issue.

The GMiner miner software was originally only an Nvidia GPU miner, although some algorithms are already supported on AMD GPUs as well. Do note that GMiner is a closed source miner for Nvidia and AMD GPUs with binaries available for both Windows and Linux, there is a 2% developer fee built-in the software.

– To download and try the latest release of the Gminer v2.04 Nvidia and AMD GPU miner…


top