Posts Tagged ‘ProgPoW miner’

New GMiner 2.04 With Support for the New KAWPOW Algorithm

29, Mar 2020

It did not take long and now the latest GMiner 2.04 GPU miner had added support for the new KAWPOW mining algorithm that RavenCoin (RVN) might/could/should/would be forking to sometime in April. The KAWPOW algorithm is a derivative of ProgPOW with parameters specific for RavenCoin, so another miner with ProgPoW support will not work unless specific RVN support is added like in the case of GMiner that already had ProgPoW support, but needed an update for KAWPOW support. Do note that support for KAWPOW is currently only available for Nvidia GPUs and that goes for ProgPoW as well. You can already test KAWPOW support on the RavenCoin test network to get ready your miner, there miner RVNt testnet tokens do not have any value though.

Besides the new algorithm being added, the latest version of GMiner addresses an issue we have noted regarding high CPU usage in Qitmeer (PMEER) support. There is a new “--trim” parameter being introduced to control additional trim round count for Cuckoo24 (Qitmeer) algorithm that should help reduce CPU load, so you can give it a try and see if it helps if you have any GPU mining rigs with lower-end CPUs that have high CPU load issue.

The GMiner miner software was originally only an Nvidia GPU miner, although some algorithms are already supported on AMD GPUs as well. Do note that GMiner is a closed source miner for Nvidia and AMD GPUs with binaries available for both Windows and Linux, there is a 2% developer fee built-in the software.

– To download and try the latest release of the Gminer v2.04 Nvidia and AMD GPU miner…

New GMiner 2.03 With Support for Qitmeer (PMEER) Mining

22, Mar 2020

The latest GMiner 2.03 GPU miner adds support for the Qitmeer (PMEER) mining, however do not be in a hurry to try mining using the Cuckoo24 algorithm that has been just added. Have in mind that the Qitmeer (PMEER) mining support comes with a 5% developer fee and is apparently CPU intensive, so you might have trouble using the latest GMiner with Qitmeer (PMEER) mining on mining rigs with most typical dual-core lower performance processors. Frankly we are a bit disappointed that the official release notes do not mention the higher developer fee for the new algorithm, nor that it is apparently heavier in terms of CPU requirements.

The GMiner miner software was originally only an Nvidia GPU miner, although some algorithms are already supported on AMD GPUs as well. Do note that GMiner is a closed source miner for Nvidia and AMD GPUs with binaries available for both Windows and Linux, there is a 2% developer fee built-in the software.

– To download and try the latest release of the Gminer v2.03 Nvidia and AMD GPU miner…

Mining Super Zero (SERO) Using the ProgPoW Algorithm on Nvidia GPUs

16, Mar 2020

The ProgPoW mining algorithm is still not widely used by crypto projects, some of you migh remember Bitcoin Interest (BCI) as the first to switch their PoW mining to ProgPoW, but now the project is pretty much dying a slow death. And while we are waiting to see when and if Ethereum (ETH) will finally switch from Ethash to ProgPoW as a mining algorithm, there is another project that has been using ProgPoW for a while now – Super Zero (SERO) that you may play around with if you want to see the current status of ProgPoW miners. There are of course some other projects using ProgPoW as well, but among them SERO is pretty much the most popular one. We remind you that ProgPoW or Programmatic Proof-of-Work was designed in a way that it utilizes graphics processors to their maximum in order to provide an equal level performance without favoring a specific GPU manufacturer or being able to actually provide much faster hashrate if implemented on ASICs. Some good places to trade the coin include Citex, Gateio and Hotbit.

Recently GMiner has added support for ProgPoW mining for SERO on Nvidia GPUs, however that was a bit problematic as it required the user to install the respective Nvidia CUDA Toolkit for the video drivers you have used. The latest GMiner 2.01 has addressed this problem by including the required runtime libraries needed for ProgPoW support, so things are easier and less problematic using GMiner 2.01 for mining SERO on Nvidia GPUs using the ProgPoW algo. GMiner however is not the only mining software to support ProgPoW, it is just the latest one to add support, prior to that you could mine using MBMiner and also prior to that with TT-Miner. In fact TT-Miner (Trade-Tec Miner) was one of the first to introduce ProgPoW support along with the controversial and now not available anymore Progminer software.

Now, the big question that remains is which mine of the three should you be using if you are mining SERO with the ProgPoW algorithm on Nvidia GPUs? Well, performance wise all of the miners are doing pretty much the same in our up to date tests done on GTX 1080 Ti… it seems that ProgPoW support is based on the same kernel in all of the miners and not much has been further optimized (maybe not much is possible) since last year. So how can you make the right choice if hashrate is the almost the same on all of the 3 available miners, you should simply look at other things, like the dev fee that these miners have. GMiner and NBMiner do come with 2% developer fee for ProgPoW mining while TT-Miner has only 1% dev fee for all of the supported algorithm, so it seems like the best choice for the moment.

– To download and try the latest TT-Miner 3.2.2 for SERO (Super Zero) ProgPoW mining…


top