filmes porno buceta gostosa phim sex www xxnxx com xxxvideos porno Xvideos Com

Search Results

Not Mining Neurai (XNA) With Your GPUs, You Probably Should

3, Jul 2023

Lately there have been a number of PoW-based Layer 1 crypto projects that were doing quite decent for mining with GPUs such as Kaspa (KAS), Radiant (RXD), IronFish (IRON) that are all now mineable on FPGAs and KAS even on ASIC miners, so, mining on GPUs kind of makes no sense for these projects. NEXA is also apparently soon to follow in their footsteps with FPGAs to support it, though even now not very profitable for mining on GPUs probably due to the recent listing on NiceHash. The good news is that GPU miners still do have a choice and there are some other interesting projects you can look into, one such relatively project is Neurai (XNA) and that one in particular is currently among the most profitable coins to be mined on Nvidia GPUs, though the profit is not insane, at least you should be on the plus side even at the moment.

According to the officia website the Neurai (XNA) aims to be a platform to enable harnessing the power of AI algorithms for efficient data analytics, predictive modelling, decision making and connectivity to IoT devices using blockchain assets. The project is based on the Ravencoin (RVN) code and uses the KAWPOW hashing algorithm for mining, so good news for GPU miners. Even though if you are familiar with that algorithm you would know it is not the most power efficient one, meaning higher usage compared to KAS as the algo is both GPU and memory intensive. Neurai (XNA) uses 1-minute block time and has 8 MB block size, the maximum number of XNA coins is 21 Billion and the project utilizes micro halvings with 5% every 10 days and it is expected that around 57% of the total coins will be mined in the first year. That is good news for everyone that jumps earlier into mining of buying some coins than later on.

Neurai (XNA) is mineable on multiple pools with the biggest one currently being Rplant with over half the network hashrate, though you can also mine on Neuraipool, Zergpool, Ekapool, Zpool and others. An exchange where you can already trade mined XNA coins is TxBit or you can get a bag and hold it while the price is still very low.

You can mine Neurai (XNA) on any mining software that supports the KAWPOW algorithm, though the latest updated software that has separate XNA support officially is bzMiner 15.4.0. Below you can find an example for mining XNA on Nvidia RTX 3070 GPU with a hashrate of about 29-30 MH/s per GPU using a moderate power limit of 150W, 1250 MHz GPU clock and +1000 MHz on the video memory:

bzminer -a xna -w YOUR_WALLET.WORKER_ID -p stratum+ssl://stratum-eu.rplant.xyz:17029 --nc 1 --oc_power_limit 150 --oc_lock_core_clock 1250 --oc_memory_clock_offset 1000

Do not forget to replace the YOUR_WALLET and WORKER_ID with your own in order to be able to actually mine, also the example uses Rplant as a mining pool. You can vary the hashrate up and down, bur for more you would also need to increase the power consumption without not that much of improvement in terms of hashrate, a good step down is to go for 120W power limit with lower memory and clock for if you want less power consumption.

– For more information about the Neurai (XNA) crypto project…

Get Ready for Mining IronFish (IRON) In Time for the Mainnet Launch

19, Apr 2023

IronFish (IRON) is a new privacy-oriented Layer-1 Proof-of-Work crypto project that is launching its mainnet tomorrow on April 20th 2023 and that is when the actual mining of the IRON coins will start. IronFish has been in development for a while now and has been running an incentivized testnet for quite some time in order to make sure that at launch everything will be operating properly and everyone will be ready to start mining and using IRON. Every single IronFish transaction is encrypted, hiding sensitive user information on who the sender, recipient, or the amount of transaction was with an accompanying zero-knowledge proof (zk-SNARKs).

The IronFish genesis block will include 42M tokens that will be distributed to insiders, foundation, and community members and to incentivise testnet participants. So, do have in mind that there will be high initial number of coins generated even before mining actually starts, though these will be a 1-year lock-up period for most of these coins, meaning that no tokens can be traded or transferred by an insider for 12 months after the mainnet event. The mining will start with 20 IRON coins per block and a 60 second block time with the block reward going down a little by little every year (not halving every year!).

Now, let us get onto mining IronFish (IRON) coins. Due to the incentivized testnet there are already some pools and mining software available that support the Blake3-based IronFish mining algorithm and you can head on and give it a go mining with your existing GPU hardware. Currently you will be mining testnet coins, but the pools and miners should continue to mine with the launch of the mainnet when that happens tomorrow. This simply means that you can be ready ahead of time and start mining right at the launch, though for that you would need to get the CLI (needs to be compiled) or GUI wallet (node is not syncing) and install it and generate a wallet address that you can use to mine (the address should continue to work on the mainnet, though no coins mined from the testnet will be available there). Pools where you can mine IronFish (currently on the testnet) include HeroMiners, Flexpool and Kryptex and others will probably soon follow with support as the mainnet launches tomorrow.

There are currently three miners available for GPU miners to choose from for mining IRON coins – BzMiner v14.2.0 (AMD/Nvidia), Rigel 1.4.1 (Nvidia Only) and SRBMiner-MULTI v2.2.4 (AMD/Nvidia). Our advice will be to opt out for the SRBMiner-Muilti for the moment as it seems to be faster than the other two options, about 3 times faster on Nvidia RTX 3070 in our comparison tests with similar power usage. Another good thing about the IronFish mining algorithm is that it is a GPU-intensive one, being Blake-based, so memory can run at the minimum operating frequency and you can use a GPU offset to further lower the operating voltage and reduce power usage. In fact, if you have mined KASPA (KAS), Radiant (RXD) or any other of the more recent GPU-intensive crypto coins you should have a good idea on what settings to use for the GPU clock, offset and memory clock in order to optimize performance and reduce power usage (the same clocks should be a very good starting point).

Here is an example command line to run SRBMiner-Multi on Nvidia RTX 3070 for mining IronFish:

SRBMiner-MULTI --disable-cpu --algorithm blake3_ironfish --pool de.ironfish.herominers.com:1145 --wallet WALLET-ID.WORKER-ID --gpu-cclock0 1750 --gpu-mclock0 810 --gpu-coffset0 250

Make sure you set the WALLET-ID and WORKER-ID in order for the miner to properly function and mine to your IronFish wallet!
A good idea to work on is adding Zilliqa (ZIL) dual-mining to go along with IronFish mining as it will increase profit without affecting much the IRON mining, another thing to consider is triple-mining by also adding a memory-intensive algorithm as well in the mix.

Update: Rigel 1.4.2 and BzMiner v14.2.2 updates made them perform faster than SRBMiner-Multi 2.2.4, the Rigel 1.4.3 currently seems to be the fastest option for Nvidia. F2Pool has added support for IronFish mining as well as does not require you to have a wallet address to mine (just when you want a payout). The official GUI wallet has been taken down for now as it is apparently having issues.

– For more information about the project visit the official website of IronFish…

Mine CLORE Coins Used by the CLORE.AI Distributed Computing Platform

22, Jan 2023

The CLORE AI platform is trying to build a distributed supercomputer where regular users can offer their computational power and get paid in BTC for the use of their hardware as well as being rewarded with CLORE coins. The project runs a marketplace that can offer computational power from distributed network of providers all around the world at unbeatable prices and you can join in with your hardware as well as long as you have an Nvidia GPU-equipped computer. There is also the CLORE Blockchain where CLORE coins can be mined using the KAWPOW algorithm (the same one used by RavenCoin – RVN) that are a part of the project’s ecosystem.

The CLORE Blockchain has total supply of 1,300,000,000 coins with the block reward decreasing a little bit with every new block (starting at 542 coins per block and currently around 527 at block 64000), the block time is 1 minute. Do note however that the block reward is being split at 50% for the GPU miners, 40% as rewards for the hosting providers and 10% as developer fee to be used for the growth of the platform. CLORE AI already has a fully functional GPU compute marketplace, that can be used for any workload that runs on Linux, basically any AI workload, rendering, transcoding, password recovery etc.

There are already more than 10 mining pools supporting CLORE mining with the largest in terms of hashrate being rplant.xyz, newpool.pw and fastpool.xyz. CLORE is already available for trading on Exbitron and TxBit along with some smaller ones as well. You can mine with any of the GPU miners that have support for the KAWPOW algorithm such as GMiner, T-Rex, WildRig Multi, NBMiner etc. depending on your mining hardware you can choose what performs best in terms of hashrate. KAWPOW is both a GPU and memory intensive algorithm, so a higher power usage is to be expected from the GPUs for best performance unlike some other GPU only or memory only intensive algorithms where you may optimize power usage.

– For more details about the CLORE Blockchain as a part of the CLORE.AI platform…


top