Posts Tagged ‘Cuckatoo31’

New GMiner 2.07 With a Performance Boost for the Cuckatoo32 Algorithm

26, Apr 2020

The latest GMiner 2.07 Nvidia and AMD GPU miner continues improving the Cuckatoo32 performance with the latest update capable of delivering up to +20% performance boost depending on the GPU and OC mode used according to the developer. Definitely a nice improvement worth an updating if you are mining anything that uses the Cuckatoo32 algo, but also have in mind that the default developer fee for the Cuckatoo32 algorithm is set at 3% and is not the standard 2% as for most other algorithms supported by GMiner.

The GMiner miner software was originally only an Nvidia GPU miner, although some algorithms are already supported on AMD GPUs as well. Do note that GMiner is a closed source miner for Nvidia and AMD GPUs with binaries available for both Windows and Linux, there is a 2% developer fee built-in the software.

– To download and try the latest release of the Gminer v2.07 Nvidia and AMD GPU miner…

New NBMiner 29.0 With Support for The New KAWPOW PoW Algorithm

3, Apr 2020

The latest NBMiner 29.0 update comes with added support for the KAWPOW algorithm that is going to soon be used by RavenCoin (RVN)… most likely. The KAWPAW algorithm is based on ProgPoW with some parameters specific for Ravencoin, so a regular ProgPow miner won’t do. So now, besides the official kawpowminer and the recently released Gminer with KAWPOW support you also have a third alternative in the form of the latest NBMiner and others will most likely follow as well. It seems however that all of the miners could be based on the same reference ProgPow codebase and there is currently not much of a performance difference apparently, so it is more like which one you are more used to. Below you can see an official list of the expected performance on popular mining GPUs at default stock settings for the KAWPOW algorithm when using NBMiner:

NBMiner 29.0 KAWPOW Expected Performance:
– Nvidia P106-100: 10.3 MH/S
– Nvidia P104-8G: 17.5 MH/S
– Nvidia GTX 1070 Ti: 13.3 MH/s
– Nvidia GTX 1080 Ti: 22.5 MH/s
– Nvidia GTX 2080: 25.8 MH/s
– AMD Radeon RX 580: 10.3 MH/s

We remind you that the NBMiner is a closed source GPU miner for Nvidia CUDA and now AMD as well that is available for both Windows and Linux operating systems and it has the following developer fee built-in: tensority_ethash 3%, tensority(Pascal) 2%, tensority(Turing) 3%, ethash 0.65%, cuckaroo & cuckatoo & cuckaroo_swap 2%, progpow_sero 2%, sipc 2%, bfc 3%, hns 2%, hns_ethash 3%, trb 2%, trb_ethash 3%, kawpow 2%.

– To download and try the latest NBMiner 29.0 Nvidia and AMD GPU Miner for Windows/Linux…

New GMiner 2.05 With Improved Performance for Qitmeer (PMEER)

3, Apr 2020

The latest GMiner 2.05 Nvidia and AMD GPU miner continues improving the recently added Qitmeer (PMEER) support that proved to have quite big demand for CPU power initially. The previous version 2.04 of the miner has improved the situation a bit with the introduction of an additional parameter to reduce CPU load, but the latest update does this even better. The CPU usage has been decreased significantly and should now be fine for GPU mining rigs with lower-end processors mining Qitmeer (PMEER), and there is also a significant performance improvement of up to 30% over what was already available. The only thing that you might not like that much yet is the remaining higher 5% dev fee for that particular algorithm that the miner still has compared to the regular 2% for other algorithms.

The GMiner miner software was originally only an Nvidia GPU miner, although some algorithms are already supported on AMD GPUs as well. Do note that GMiner is a closed source miner for Nvidia and AMD GPUs with binaries available for both Windows and Linux, there is a 2% developer fee built-in the software.

– To download and try the latest release of the Gminer v2.05 Nvidia and AMD GPU miner…


top