filmes porno buceta gostosa phim sex www xxnxx com xxxvideos porno Xvideos Com

Search Results

New z-enemy 2.00 Nvidia GPU Miner With New API and Web-based Monitoring

24, May 2019

It has been quite a while since we have seen an update of the z-enemy Nvidia GPU miner. Up until now updates were mostly focused on performance improvements and new algorithm being added, but the new major version 2.0 of the z-enemy introduces a new way to manage and monitor the miner. There is a new HTTP JSON API (see the included json_api_help.txt file for the details), available at port 4067 by default as well as a web control panel with real-time monitoring and charts. The user interface is responsive and should be looking well on most mobile phones and tablets and not only on computers, it is informative in terms of stats and graphs, looks nice and works pretty well, so you might want to check it out if you are mining altcoins using X16-based algorithms or anything else that z-enemy supports.


The latest z-enemy version 2.00 is available for CUDA 9.1, 9.2 and 10.0 for 64-bit Windows versions as well as CUDA 9.0, CUDA 9.1, CUDA 9.2 and CUDA 10 binaries for Linux (HiveOS, PiMP OS, EthOS & Ubuntu). Make sure that you have the respective recent video driver version installed for the CUDA version you want to use – 388+ for 9.1, 397+ for 9.2 and 411+ for CUDA 10.0, though 415+ is advised for the best performance. We remind you that z-enemy is a closed source miner available only as a binary release and it contains a 1% developer fee built-in to support further software development.

Windows Downloads:
– Download z-enemy 2.00 Windows CUDA 9.1 64-bit
– Download z-enemy 2.00 Windows CUDA 9.2 64-bit
– Download z-enemy 2.00 Windows CUDA 10.0 64-bit

Linux Download (HiveOS, PiMP OS, EthOS & Ubuntu):
– Download z-enemy 2.00 Linux CUDA 9.1
– Download z-enemy 2.00 Linux CUDA 9.2
– Download z-enemy 2.00 Linux CUDA 10.0

Bitmain AntMiner Z Series Unlocked Fuddware v2.2 and v2.3 With Z11 Support

15, May 2019

Efudd’s modified firmware for the Bitmain AntMiner Z series ASIC miners now supports the Bitmain AntMiner Z11 with its latest update to version 2.3, AntMiner Z9 is supported by version 2.2 and for the AntMiner Z9-Mini you need to use the version 2.1d. The modified firmware allows for more advanced overclock including frequency and voltage tuning with voltage controls per hashboard option available. With the modified firmware it is easier to achieve higher performance than with the stock firmware that has limited OC capabilities by Bitmain. According to the developer of the modified firmware 150+ KSol/s (up from the stock 135 KSol/s) should be doable with minimal tuning and further increase to 170-180 KSol/s might be achievable with more power, careful tuning, good cooling and some luck.

Do note that the modified firmware comes with a built-in 3% developer fee, so the miner will be mining for the developer 10 minutes out of every 330 minutes it is operating.

– For more information and to download and try the modified Antminer Z9/Z11 overclock firmware…

New SRBMiner 1.8.8 Cryptonight AMD GPU Miner With Optimizations Reducing CPU Usage

7, May 2019

The latest CryptoNight AMD GPU miner SRBMiner 1.8.8 comes with a significantly reduced CPU usage of up to ~50% that can be noticed on CryptoNight algorithms with small scratchpad like UPX2 and Turtle for example. This can be helpful on GPU mining rigs where the CPUs are struggling to provide enough performance and as a side effect there could be a slight performance boost for RX cards on UPX2. The new version brings some usability and functionality changes as well to make the use of the miner easier and more problem free.

You can find the full changelog for the latest release quoted below. Do note that the developer fee is ~0.85% for both normal mode and algorithm switching mode as SRBMiner is a closed source miner available for AMD GPU miners only under Windows.

SRBMiner V1.8.8 Full Cangelog:
– Reduced CPU usage up to ~50%, can be noticed on algos with small scratchpad
– User is now informed about tweaking status on the screen too, not just in log
– No more --gpureorder, device ordering by bus id is now the default/only display mode
– Added parameter --watchdogrounds, which controls after how many rounds will watchdog trigger
– min_rig_speed_duration default is 1 minute now, because of the new --watchdogrounds parameter
– Fixed a few cosmetical things on web stats

– For more information about the latest SRBMiner Cryptonight AMD GPU Miner V1.8.8…


top